Itc-100Sl Slave Unit - Datavideo HS-550 Manual

ITC-100SL Slave Unit

XLR Connection
Connects the ITC-100SL to the ITC-100 Base Station. Power, tally and bi-directional audio
are all carried through the same CB-3 cable.
Call Button
Sends a paging message to the ITC-100 Base Station. The channel button will flash
orange and there will be an audible tone, each time the button is pressed.
Bi-Color Tally LED
Will illuminate RED when the channel is LIVE and AMBER when the channel is CUED
Talk Button
Opens up talk back communication with the ITC-100 base station, and any other active
channels.
Volume Control
Adjusts the volume of the headphones.
Mic / Headphone Socket
The ITC-100SL has both a 3.5mm and 2.5mm Mic / Headset socket. A standard 3.5mm
Mic / Headset can be used, or a Motorola type 2.5mm Mic / headset could be used if
preferred.
External Tally LED Socket
An external tally display (TD-1) can be connected to the ITC-100SL. This enables the tally
light to be positioned in a more convenient place, such as on top of the camera. When the
channel is LIVE the LED will be RED, and when the channel is CUED the LED will be
AMBER.
N.B. The Tally LED on the ITC-100SL will continue to operate as normal when a TD-1 has
been added.
Power LED
The Power LED indicates when the channel is active. If the operator has opened the
channel by pressing the channel button 1 ~ 8, or by pressing ALL then the LED will light
up.
N.B. The tally indicator lights will continue to work even when the Power LED is not on, and
the channel is not active.
28