Itc-100Sl Slave Unit - Datavideo HS-2000 Instruction Manual

ITC-100SL Slave Unit

XLR Connection
Connects the ITC-100SL to the ITC-50 Base Station. Power, tally and bi-directional audio
are all carried through the same cable.
Call Button
Sends a paging message to the ITC-50 Base Station. The channel button will flash orange
and there will be an audible tone, each time the button is pressed.
Bi-Colour Tally LED
Will illuminate RED when the channel is LIVE and AMBER when the channel is CUED
Talk Button
Opens up talk back communication with the ITC-50 base station, and any other active
channels. Press the button to talk; release the button to end communication.
PLEASE NOTE: It is important to release the talk button to deactivate the talk
Volume Control
Adjusts the volume of the headphones.
Mic / Headphone Socket
The ITC-100SL has both 3.5mm and 2.5mm Mic / Headset socket. A standard 3.5mm Mic /
Headset can be used, or a Motorola type 2.5mm Mic / headset could be used if preferred.
channel as soon as you have finished talking, otherwise it will
become distracting and confusing for other members of the crew.
44