Switching The Unit On; Formatting A Drive Before First Use; Lcd Clip Status Display Explained - Datavideo DN-600 Instruction Manual

DN-600 Recorder
Ensure the DN-600 power supply is connected to the rear panel of the recorder and the HE-1
removable drive enclosure is fitted and locked in place.
The DN-600 has only one power ON/OFF switch which is located on the rear panel. To turn the
unit ON depress the I side of the switch. The front panel buttons and LCD display will become backlit
and the HE-1 drive LED will light shortly before the LCD panel shows the LCD Clip Status Display.
Once a drive has been installed into the HE-1 drive enclosure as described on page 7 it will need to
be formatted in the recorder before first use. The recorder's LCD panel will display options as follows.
1. Choose the FORMAT option.
3. Wait for the drive to be initialised.
1. Sync to Tape Indicator ST0=OFF and ST1=ON
2. Analogue / Digital source indicator
3. Loop Playback indicator – If not present feature is OFF
4. Remaining Recording Space in Hours and Minutes
5. Current Bin and Clip
6. File type indicator
7. Current Time Code or total length of clip
8. Menu or recorder options
9. Record, Pause, STOP, FFWD, REV and Playback indication

Switching the unit ON

Power light indicator
Power light on the DN-600 front panel is only used to confirm if the unit
is powered ON or OFF. The Power ON/OFF switch is located on the
rear of the unit.

Formatting a drive before first use

LCD Clip Status Display explained

2. Press REC & PLAY at the same time.
4. The drive is now ready for first use.
11