Itc-50 Intercom Controls - Datavideo HS-550 Manual

ITC-50 Intercom Controls

1
1. XLR Microphone Socket
2. Headphone Socket
3. Microphone / Headset Socket
4. MUTE Button
XLR Microphone Socket
Combined XLR / ¼" (6.3mm) Jack Microphone Input for either a Condenser or Dynamic
Gooseneck Microphone. XLR supports Condenser Microphones ¼" (6.3mm) Jack supports
Dynamic.
Headphone Socket
¼ " / 6.3mm Stereo Headphone Socket for conventional headphones. Plugging in
headphones will disable the built-in speaker
Microphone / Headset Socket
3.5mm Stereo Socket for combined Microphone Headset.
Plugging in a Microphone / Headset will disable the built-in speaker and the XLR Microphone
Input.
MUTE Button
Mutes all communication from the base station or any channel.
N.B. If any channel uses the CALL button the paging tone will still sound even when
the MUTE button is active.
Channel Buttons
Opens communication with individual channels. More than 1 channel can be active at any
given time, active channels are illuminated red.
All active channels will hear any communication from the operator or from any other active
channel.
The buttons will also indicate if any channel is paging, the paging channel will flash in orange
until the page is answered.
Opens communication with all channels. All channels will hear communication from the
operator, or from any other channel using the TALK button.
Volume Control
Controls the Volume of the built-in speaker or outputs to the headphones or mic/headset
according to what is connected
Built-In Speaker
Sounds audible alert when a channel is paging and provides audio during talkback
conversations. Speaker is mute when headphones or mic / headset are connected to the
ITC-50
2 3 4 5 6
5. 1~5 & ALL Channel Buttons
6. Volume Control
7. Built-In Speaker
27
7