Effects: Quad; Effects: Split; Effects: Picture In Picture - Datavideo HS-550 Manual

Dual channel effects are produced on the source selected in the Main Video Source bus and require a second
source, which is always selected in the Sub Video Source bus. Dual channel effects include Picture in Picture.
For example, select Main and Sub Video Sources, and then press the PIP (Picture in Picture) button; immediately,
on the program monitor, you will see the Sub Video Source in a small window.
For more information on these dual channel effects, see the appropriate sections (Quad, Split, and Picture in
Picture) below.

Effects: Quad

The Quad effect combines 4 input videos into 1 output. When this effect is activated, it shows the 4 video sources
on 1 single monitor. Each source takes one quarter of the entire screen like the Quad Preview. Press the button
again, and it returns to the previously selected main source in full screen.
This is a dual channel effect, and cannot be used with any other transitions or effects.

Effects: Split

This effect squeezes the Main Source and Sub Source video into one program screen. The Main Source is placed
on the left, and the Sub Source on the right. To select different sources for the left window press different channel
buttons on the Main Source row. To select different sources for the right window press different channel buttons
on the Sub Source row. You could switch from left to right, or right to left by pressing the "LEFT" or "RIGHT"
button.
This is a dual channel effect, and cannot be used with any transitions. Only simple cuts can be used.

Effects: Picture in Picture

The Picture in Picture or PIP effect puts the selected Sub Source video in a smaller window on top of the Main
Video Source. Variables for this effect include changing window size and position.
Window size (2 sizes are available); change the window size by pressing the + and - buttons on the left of the
Wipe transitions. (+ is larger, - is smaller).
There are 9 different positions that are located on the right of the Wipe transition effects. Select from one of the
preset locations by using the buttons. On each corner, use "Right" and "Left" to move the window closer to the
edge or to the center.
This effect may also be used in conjunction with the Border effect (see next page).
This is a dual channel effect, and cannot be used with any transitions.
15