Main Unit - Rear Panel; Program And Preset Rows - Datavideo TVS-1000A Instruction Manual

M/E 1 M/E 1 view selection
M/E 2 M/E 2 view selection
M/E 3 M/E 3 view selection
M/E 4 M/E 4 view selection
Media 1 Media 1 Video selection
Media 2
Media 2 Video selection
Still 1
Still Picture 1 selection
Still 2 Still Picture 2 selection
AUX AUX Card Input selection
Phase 1 Phase 1 selection
Phase 2 Phase 2 selection
*Not available on TVS-1000A

2.6.2 Main Unit - Rear Panel

2.6.3 Program and Preset rows

The Program row of buttons is for control of the program output; this is the live output. You can
switch or CUT from one video source to another directly on the Program row. You will see the
PGM output changes as you press different keys along this top row of buttons.
The Preset row of buttons is for control of the Preview window. The Preset row sets the next
transitioned program by pressing the corresponding key to select the source.
FTB Fade PGM to Black
Cross
Cross dissolve transition effect
Dissolve
T-Bar Manual Transition
STM Program Streaming
CAP Video Recording
Still Grab
Still Picture Grab
DSK 1 and source assignment
DSK 1
knob
DSK 2 and source assignment
DSK 2
knob
Cut Placement of DSK on Program
Fade Gradual placement of DSK
RS-232: RS-232 Communication
Interface
DC 12V: 12V DC Power Input
ON/OFF: Power Button
14