Table of Contents
Advertisement
8. Open up Powerpoint on the PC and use Set Up Show so that the presentations play back on Monitor 2
(the HS-550) and the presentator's output is sent to Monitor 1 (the PC's own monitor).
9. Run the Powerpoint presentation and you should see it playing back on the HS-550 PROGRAM window.
10. Now you can attempt to work the presentation or graphics into your mix, either on its own or with the
speaker in a smaller PIP window.
11. Note if you plan to use the PIP window effect then select the speaker as the sub source input before
pressing the PIP button. The presentation layout also needs to be adjusted to leave space for the PIP
window.
Recording from the HS-550 with an optional DN-60
A
A. Toggle between
(OFF) allow DN-60 Playback to HS-550 (ON) allow DN-60 to Record
18
Advertisement
Table of Contents
