Table of Contents
Advertisement
Rear Panel
Battery Compartment Cover – Press in gently and slide up to access
1.
Camera Mount screw thread – Attach DN-60 camera mount here
2.
DV/DVC Pro/HDV i/o Port – Attach 6pin IEEE-1394 cable connector here
3.
RS-232 Port – Connect 3.5mm Jack for RS-422 control by computer
4.
CF Card Slot
1. CF Card Protection Cover – Slide down then lift up carefully to open this cover and get access to the CF card
slot and the card eject button.
2. CF Card Eject Button – Press in to eject the fitted CF card. When the slot is empty (no CF card inserted), this
button is normally in the depressed position. Upon inserting a CF card, the button moves out again.
NOTE: CF cards need to be inserted carefully the correct way up so that the pins inside the unit marry
correctly with the card holes otherwise damage to the pins may happen.
Do not force a card into the slot or force the card protection cover.
20
Advertisement
Table of Contents
