ITC-150 (Intercom) Specification
MIC / HEADSET
INPUTS
HEADPHONE
&
OUTPUTS
MICROPHONE
Communication interface
FREQUENCY RESPONSE
THD
S/N
BUILT-IN SPEAKER
ITC-100SL Specification
INPUT
MIC / HEADSET SOCKET
TALLY OUT SOCKET
TALLY LED
POWER LED
TLM-170H Specification
LCD Display
Resolution
Aspect Ratio
LED Life time
Brightness (Luminance)
Contrast Ratio
View Angle
Video System
Colour Adjustment
Operation condition
3.5mm Stereo Jack Socket for combination Headphone / Microphone
Headset Impedance 8~600 ohms 100mW(min)
¼" ( 6.3mm ) Stereo Headphone Socket
Headset Impedance 8~600 ohms 100mW(min)
3 Pin XLR / ¼" ( 6.3mm ) Jack Microphone Socket Switchable Condenser /
Dynamic Input.
Microphone Sensitivity Level : -67dB
8 channels 5 pin XLR
550-3.6KHz, < +/-3dB
< 3%
> 50dB
70mm x 30mm 32 Ohm 3 Watts
5 Pin XLR Connector
3.5mm Stereo Jack Socket for combination Headphone / Microphone
Headset Impedance 8~600 ohms 100mW(min)
Microphone Level -67Db or 2.5mm Stereo Jack Socket, for Motorola Mobile Phone
type headset / microphone
3.5mm Jack Socket to connect to TD-1 Tally Indicator
Bi-Colour LED – RED indicates LIVE / AMBER Indicates CUED
Illuminates to indicate that power is being received
17.3" TFT LCD
RGB 1600 x 900 pixel
4:3 and 16:9 selectable
12,000 hrs. (approx.)
220 cd/m²
500:1
Top: 40 deg Bottom: 60 deg
Left: 60 deg Right:
60 deg
NTSC / PAL auto recognition
Brightness, Contrast, Colour Saturation
Operation temperature from 0℃ to 50℃, RH less than 90%
35