Main Unit - Rear Panel; Program And Preset Rows; Preview And Program Switching - Datavideo TVS-1200A Instruction Manual

Still 2 Still Picture 2 selection
AUX AUX Card Input selection
Phase 1 Phase 1 selection
Phase 2 Phase 2 selection

2.5.2 Main Unit - Rear Panel

2.5.3 Program and Preset rows

The Program row of buttons is for control of the program output; this is the live output. You
can switch or CUT from one video source to another directly on the Program row. You will see
the PGM output changes as you press different keys along this top row of buttons.
The Preset row of buttons is for control of the Preview window. The Preset row sets the next
transitioned program by pressing the corresponding key to select the source.

2.5.4 Preview and Program Switching

DSK 2
Cut
Fade
TAKE
This performs switching from the current program source to
the selected preset source.
Cross-Dissolve
This performs a cross-dissolve switch from the current
program source to the selected preset source.
FTB
Fade To Black, this button fades the current video program
source to black. When pressed again it acts in reverse from
complete black to the currently selected program video
source.
14
DSK 2 and source assignment knob
Placement of DSK on Program
Gradual placement of DSK
RS-232: RS-232 Communication
Interface
DC 12V: 12V DC Power Input
ON/OFF: Power Button