Using The Settings Key - Brother 884-T23 Operation Manual

Using the settings key

Touch to change the default machine settings (light,
volume, speaker volume, opening display etc.). To display the
different settings screens, touch
settings", for "General settings", or
"Wireless LAN settings".
Memo
• The machine default setting is highlighted.
• Touch or to display the previous or next
page.
■ Embroidery settings
for "Embroidery
for
1 2
3
4
5
6
7
8
9
0
A
B
1 The settings on the page containing this key will be
reverted to their defaults.
2 An image of the current settings screen can be saved on
USB media.
3 The guides (center point marker and grid) for the pattern
display area can be specified. (page 109)
4 The color information in the thread color sequence
display and the needle bar thread information can be
switched to the color name, the thread brand and color
number or the embroidering time. (page 109)
5 Depending on the color of the embroidery, changing the
background color of the pattern display area and
thumbnails may make them more visible and easier to
select.
6 Selects whether or not jump stitches are trimmed in
imported patterns. (page 109)
Memo
• On the pattern editing screen, if the jump stitch trim
setting key is selected (
be trimmed even if [Thread Cut Initial Setting] is set
to [OFF]. For details, refer to "Trimming jump
stitches" on page 49.
7 Specifies the jump stitch length. When using Tajima
embroidery data (.dst), you can specify whether or not
the thread is cut according to the jump codes.
(page 109)
8 Specifies the length of short stitches that are to be
deleted. (page 110)
9 Specifies the length of upper thread that remains
threaded through the needle after the thread is trimmed
(length of thread passed through the eye of the needle).
(page 110)
0 Specify the distance between the pattern and the
basting stitching. (page 110)
A Specifies the acceleration from the initial speed (when
embroidery begins) until the maximum embroidery
speed is reached.
Memo
• If the setting for [Short Stitch Delete] 8 is changed
from the previous setting, the new setting is
applied to the subsequent embroidery.
B A specific thread color can be set to a needle bar. The
specified color remains assigned to the needle bar until
the setting is canceled. You can also specify the
maximum embroidery speed for a needle bar as well as
cancel automatic needle threading. This feature is not
accessible through the embroidering screen. (page 107)
GETTING READY
1
), the jump stitches will
25