Brother 884-T23 Operation Manual page 56

■ Embroidering the pattern repeatedly
After creating the repeated pattern, rehoop the fabric in
the embroidery frame and keep embroidering for the next
pattern.
Memo
• Using the optional magnetic sash frame, the fabric
can be easily rehooped without removing the frame
from the machine. For details, refer to the manual
included with magnetic sash frame.
Create the repeated pattern with the thread mark at
a
the center of the end of the pattern. (page 53)
b Touch ,
c Touch , and then press the "Start/Stop"
button to start embroidering.
 When embroidering is finished, the thread mark is
embroidered with the last thread color.
d Remove the embroidery frame.
54
, then .
e Rehoop the fabric in the embroidery frame.
Note
• Adjust the position of the fabric so that the
embroidering area for the next pattern is within the
embroidering area of the embroidery sheet.
1 Pattern embroidered first
2 Position of pattern to be embroidered next
3 Embroidering area of embroidery sheet
Attach the embroidery frame to the machine, and then
f
touch in the embroidering settings screen.
g Touch .
h Touch to set the starting point to the left side of
the pattern.
Touch .
i
j Align the needle drop point with the thread mark on
the fabric.
k If the pattern position cannot be aligned using the
positioning keys, rehoop the fabric, and then try again
to align the position with the positioning keys.
Note
• After you have aligned the position of the combined
border pattern, do not rotate the pattern in the
embroidering settings screen. If the pattern is
rotated in the embroidering settings screen after
alignment, the pattern will not be properly aligned
with the thread mark or starting point.