Brother 884-T23 Operation Manual page 124

f Touch .
Memo
• The pattern can be rotated to either the left or right
when is touched.
Touch , and then press the "Start/Stop"
g
button to embroider the section.
Note
• The last step of the stitching of the section will be
an alignment stitching. Use this stitching for
placement of adjacent section.
h When embroidering is finished, the message to confirm
to embroider the next section appears. Touch
 A screen appears so that a section of the large-size
embroidery pattern can be selected.
122
i Touch to select the next section of the pattern, and
then touch
Touch , and then
j
k Hoop the fabric for the next section aligning on the
alignment stitching. In this case, align the left side of
the hoop on the right side of the section embroidered
f
in step .
1 Alignment stitching
Note
• For details on aligning and stitching split, large-size
embroidery patterns, refer to the manual included
with PE-DESIGN version 7 or later, or PE-DESIGN
NEXT.
g
l Repeat steps to
.
remaining sections of the pattern.
.
.
j
to embroider and combine the