Switching The Thread Colors On The Screen - Brother 884-T23 Operation Manual

Memo
• To temporarily register your favorite schemes,
touch (to release your favorite schemes, touch
again). 9 color schemes can be saved on the
page. Touch
favorite schemes. To cancel the registration, touch
.
Check the displayed color scheme, and then touch
h
.
* : Return to the previous screen.
* or : Display the other color schemes.
 The change thread color screen will appear.
i Touch to display the pattern editing screen.
58
to check the registered
SWITCHING THE THREAD COLORS
ON THE SCREEN
If a thread color on the spool stand is different than the
needle position thread color on the screen, the thread
colors on the screen can be switched to match the spool
stand thread color position.
Memo
• This function is not available when you set [Manual
Color Sequence] to [ON] in settings screen.
a Touch in the embroidering screen.
 The spool selection screen appears.
b Touch the number of the first needle bar that will be
switched.
• To cancel the selection, touch the same needle
number again.
c Touch the number of the other needle bar that will be
switched. The two needle numbers are connected with
an arrow.
d Touch to switch the two thread colors.
e After making the desired changes, touch .