Brother 884-T23 Operation Manual page 115

■ Repeatedly embroidering a pattern along a
diagonal
Example
a Touch in the embroidering settings screen to
display the starting/ending position settings screen.
b Select .
c Specify the upper-left corner as the starting position
and the lower-right corner as the ending position.
For the starting position, touch
.
For the ending position, touch
.
Touch to close the starting/ending position
settings screen.
d
e
f
so that it changes to
so that it changes to
ADVANCED EMBROIDERY
Embroider the first pattern.
Touch to display the embroidering screen, and
then touch and press the "Start/Stop" button.
1 Starting position
2 Ending position
After embroidering is finished, the machine stops at the
lower-right corner of the pattern.
Touch and repeat steps
times.
Note
• If the next embroidery pattern of the series will be
stitched outside the embroidery field, the message
to inform you that it cannot set the starting/ending
position will appear.
Rehoop the fabric to continue to repeat the
embroidering pattern. Touch
d e
steps and .
Memo
• If the starting position and ending position settings
are changed, instead of embroidering the patterns
in a fixed direction, various pattern designs are
possible.
3
d e
and three
and repeat
113