Brother 884-T23 Operation Manual page 116

■ Embroidering aligned characters
Follow the procedure described below to embroider
aligned characters in a single row when the pattern
extends beyond the embroidery frame.
Example: Aligning "DEF" to the characters "ABC"
Memo
• Ensure that the jump stitch trim setting key appears
as to provide a positioning point for the
second group of characters.
a Select the character patterns for "ABC".
Touch in the embroidering settings screen.
b
c Select .
d Touch .
 The needle bar is positioned in the lower-left corner
of the pattern. The embroidery frame moves so that
the needle is positioned correctly.
Note
• To cancel the starting point setting and return the
starting point to the center of the pattern, touch
.
• Use to select a different starting point for
embroidering.
e Touch to return to the embroidering settings
screen.

changes to
in the lower-left corner of the pattern.
f Touch .
114
while the starting point is set
g Touch , and then press the "Start/Stop"
button to begin embroidering.
h After the characters are embroidered, cut the threads,
remove the embroidery frame, shift the fabric in the
frame, and then attach the embroidery frame again so
that the remaining characters ("DEF") can be
embroidered.
1 End of the embroidering
a
i As in step , select the character patterns for "DEF".
j In the embroidering settings screen, touch
k Touch .
 The needle bar is positioned in the lower-left corner
of the pattern. The embroidery frame moves so that
the needle is positioned correctly.
l Touch .
.