Using The Settings Key - Brother NQ3500D Operation Manual

No. Display Key Name
H Back to beginning key
I Mirror image key
J Free motion mode key

Using the settings key

Press to change the default machine settings (needle stop position, embroidery speed, opening display, etc.). Press
, after you changed necessary settings.
■ Sewing settings
Page 1
1
2
3
1 Select whether to use the sewing speed controller to determine the zigzag width. For details, refer to "Satin stitching using the
sewing speed controller" in the "Sewing" section.
2 Make adjustments to character or decorative stitch patterns. For details, refer to "Making adjustments" in the "Decorative
sewing" section.
3 Set to "ON" when using twin needle. (page B-28)
4 Adjust the presser foot height. (Select the height of the presser foot when the presser foot is raised.)
5 Adjust the presser foot pressure. (The higher the number, the greater the pressure will be. Set the pressure at "3" for normal
sewing.) (page B-43)
6 Select either "1-01 Straight stitch (Left)" or "1-03 Straight stitch (Middle)" as the utility stitch that is automatically selected when
the machine is turned on.
7 Change the height of the presser foot when sewing is stopped when the pivot key is selected. Adjust the presser foot to one of
the three heights (3.2 mm, 5.0 mm and 7.5 mm). (page B-44)
8 Change the height of the presser foot when the machine is set to free motion sewing mode (page B-45).
9 When set to "ON", the thickness of the fabric is automatically detected by an internal sensor while sewing. This enables the fabric
to be fed smoothly (page B-44).
0 When set "ON", reinforcement stitches are sewn at the beginning and/or end of sewing for a reinforcement stitch pattern, even
when the reverse button is pressed.
When sewing is stopped, press this key to return to the beginning of the pattern. For
details, refer to "Returning to the beginning of the pattern" in the "Decorative sewing"
section.
After selecting the stitch pattern, use this key to create a horizontal mirror image of
the stitch pattern.
Press this key to enter free motion sewing mode.
Page 2
4
5
6
Explanation
Page 3
7
8
9
0
Basic operations B-13
LCD Operation
Page
–
B
B-43
B-45
or