Brother 884-T23 Operation Manual page 103

c Select the pattern.
d Touch to display the embroidering settings
screen.
e Touch in the embroidering settings screen.
1 Switch on/off the embroidery crosshair positioning laser.
f If a message appears, indicating that the move and
rotate settings will return to the original ones, touch
.
g From the reference points shown in the screen, select
the point to be used for aligning the pattern.
For this example, select the point in the lower-center of
the pattern.
h Touch
i Select the direction (from the reference point) to be
used as a reference for aligning the pattern.
For this example, select the arrow pointing upward as
the reference direction.
1
1 Cancel the pattern alignment settings.
2 Return to the previous screen.
j Touch
k Touch the positioning keys to move the embroidery
frame until the embroidery crosshair positioning laser
and the center of the mark are aligned.
1 Positioning keys
2 Frame movement speed keys
3 Center of mark
4 Embroidery crosshair positioning laser
ADVANCED EMBROIDERY
.
1
.
c
3
2
1
2
101