Combining The Separated Character Patterns; Changing The Thread Density - Brother 884-T23 Operation Manual

Combining the separated character patterns

Two separated lines of character patterns can be combined.
The characters can be aligned to the specified order. You
cannot combine the lines of character patterns if the text
contains a line feed using the Line Feed function.
a Touch .
b Select the group of character patterns that you want to
combine.
• The selected character is assigned as Number [1].
• You can select the patterns by touching them on the
screen, or touching
to be selected, and then touch
 Numbers [1] and [2] are assigned temporarily to the
patterns.
c Touch or
patterns.
d Touch to return to the previous screen.
50
or to check the patterns
.
to choose the order of the 2

Changing the thread density

The thread density for some character and frame patterns can
be changed. With certain types of patterns, the thread density
can be changed by recalculating the number of stitches in the
pattern. (page 49)
A setting between 80% and 120% in 5% increments can be
specified.
a Touch .
 The screen shown below appears.
1
2
3
1 Make the pattern less dense.
2 Make the pattern more dense.
3 Close this screen.
■ Selects a less/more thread density
Less Standard
a Touch the keys to select the desired thread density.
Each touch of a key slightly increases or decreases the
thread density.
• To return to the original thread density (standard),
select [100%].
b After making the desired changes, touch
More
.