Using The Settings Key - Brother Innov-is F440E Operation Manual

LCD Operation

Using the settings key

Press to change the default machine settings (needle stop position, embroidery speed, opening display, etc.). Press
after you changed necessary settings.
■ Embroidery settings
Page 1
1 Select the embroidery frame to be used.
2 Select the centerpoint marker and grid that are displayed. For details, refer to "Changing the "Embroidery Frame Display"" in the
"Embroidering" section.
3 When set to "ON", the embroidery pattern can be selected according to the embroidery frame size that you have selected in
1
number . For details, refer to "Selecting/displaying patterns according to the embroidery frame size" in the "Embroidering"
section.
4 Change the thread color display on the "Embroidery" screen; thread number, color name. (page B-38).
5 When the thread number "#123" is selected, select from six thread brands. (page B-38).
6 Adjust the maximum embroidery speed setting. For details, refer to "Adjusting the embroidery speed" in the "Embroidering"
section.
7 Change the display units (mm/inch).
8 Adjust the upper thread tension for embroidering. For details, refer to "Adjusting thread tension" in the "Embroidering" section.
9 Press to specify the size of pattern thumbnails. For details, refer to "Specifying the size of pattern thumbnails" in the
"Embroidering" section.
0 Change the color of the background for the embroidery display area. For details, refer to "Changing the background colors of the
embroidery patterns" in the "Embroidering" section.
A Change the color of the background for the thumbnail area. For details, refer to "Changing the background colors of the
embroidery patterns" in the "Embroidering" section.
B-10
Page 2
4
1
5
6
2
7
3
Page 3
8
9
,
0
A