Installation Preparation; Identify The Card Slot - Avaya Communication Server 1000M Single Group Manual

Installation and configuration

Installation preparation

The preparation consists of unpacking and inspecting the components, taking inventory, and
locating the card slot where the Hospitality Integrated Voice Services card will be installed.
Unpack and inspect the equipment for damage. Follow the general precautions that computer
and telephone equipment manufacturers recommend and the steps in
inspecting components
Unpacking and inspecting components
1. From the installation site, remove items that generate static charge.
2. Use antistatic spray if the site has carpet.
3. Ensure the RJ-45 and RS-232 customer-supplied cables are available. Refer to
4. Wear an anti-static wrist strap before handling any equipment.
5. Remove equipment carefully from its packaging.
6. Visually inspect the equipment for obvious faults or damage. Report any damaged
Follow the steps in
Taking inventory
1. After unpacking and visually inspecting the equipment, verify that all the equipment
2. Check the equipment received against the shipping documents.
3. Note any shortages and report them to the sales representative.

Identify the card slot

Refer to System compatibility
48 Hospitality Integrated Voice Services Fundamentals
on page 48.
Table 5: Hospitality Integrated Voice Services hardware list
Hospitality Integrated Voice Services hardware list
component to the sales representative and the carrier who delivered the
equipment.
Taking inventory
is at the site before the installation begins.
Note:
PMS requirements limit the number of Hospitality Integrated Voice Services cards
to one card per system.
on page 30 for information on identifying the card slot.
Comments? infodev@avaya.com
on page 48 to take inventory.
Unpacking and
on page 32 on
on page 32.
March 2013
Table 5: