Avaya Communication Server 1000M Single Group Manual page 61

standard cross-over RJ-45 Ethernet cable and follow the steps in
for a direct connection to a PC
If the Hospitality Integrated Voice Services card will be connected to a customer's LAN, follow
the steps in
connects to customer network
Configuring LAN parameters for a direct connection to a PC
1. Obtain the PC's IP address. To find the PC Ethernet address:
2. Define the Hospitality Integrated Voice Services card IP address close (sequenced)
3. Configure the Hospitality Integrated Voice Services card subnet mask to be the
4. Do not define a gateway.
Entering LAN parameters for a Hospitality Integrated Voice Services card that
connects to customer network
1. Once the system successfully registers the Hospitality Integrated Voice Services
2. At the root user directory prompt, enter MIVS to access the Hospitality Integrated
3. At the SAdmin, SMaint, PAdmin, PMaint, LOgout, ?: prompt, enter sa to access
4. At the SYstem, REcorder, ?: prompt, enter sy to access System Attributes.
5. Enter the system attributes of the Hospitality Integrated Voice Services card,
Hospitality Integrated Voice Services Fundamentals
on page 61.
Entering LAN parameters for a Hospitality Integrated Voice Services card that
on page 61.
a. Go to the Control Panel.
b. Double-click on the Network icon.
c. Highlight the TCP/IP and Ethernet adapter and press Enter.
d. Select Properties.
The IP address tab displays the Ethernet address and submask.
Note:
Changing the PC Ethernet address requires a reboot.
to the PC's IP address.
For example, if the PC IP address is 100.99.98.97, define the Hospitality Integrated
Voice Services card IP address as 100.99.98.96, or 100.99.98.98.
same as the PC subnet mask.
Note:
Check the connection using the PC/UNIX ping command (ping<IP-address>).
card keycode, log into the CLI as root user directory.
Voice Services directory.
System Administration.
including the IP address, gateway, and subnet mask.
See CLI System Administration menu
Hospitality Integrated Voice Services configuration
Configuring LAN parameters
on page 78 for more information.
March 2013 61