Grounding The Panel - ADC TrueNet 1U Installation And Cable Routing Instructions

ADCP-92-082 • Issue 2 • 10/2008
2.5

Grounding the Panel

Each panel has two grounding locations marked with the standard grounding symbol. These
locations are on the rear cover and right side of the panel (see
(customer supplied) to attach at the grounding location a 2-hole lug terminal such as shown in
Figure 10.
Page 10
© 2008, ADC Telecommunications, Inc.
Figure 9. Grounding Locations
(Rear View of Panel)
2-HOLE LUG
TERMINAL
HOLE CENTER
SPACING: 0.75 INCHES
STRIP BACK INSULATION
PER LUG MANUFACTURER'S
RECOMMENDATION
Figure 10. Ground Stud
Figure 9). Use M4 hardware
23126-A
GROUNDING
LOCATIONS
COPPER WIRE
23127-A