1. Manuals
  2. Brands
  3. ADC Manuals
  4. Cables and connectors
  5. DSX-1
  6. User manual

ADC DSX-1 User Manual

Cross-aisle panel
Hide thumbs Also See for DSX-1:
Table of Contents

Advertisement

Quick Links

Download this manual
Content
INTRODUCTION .......................................................................... 1
Revision History ..................................................................... 1
Trademark Information ................................................................ 1
Admonishments ..................................................................... 2
1
GENERAL.......................................................................... 2
2
DESCRIPTION ....................................................................... 2
3
APPLICATION ....................................................................... 3
3.1
3.2
3.3
4
INSTALLATION ...................................................................... 7
4.1
4.2
4.3
4.4
5
CUSTOMER INFORMATION AND ASSISTANCE .................................................13

INTRODUCTION

This manual describes the ADC DSX-1 Cross-Aisle Panels and their use in multiple lineup
DSX-1 Systems.

Revision History

ISSUE
DATE
Issue 1
04/1996
Issue 2
09/1996
Issue 3
08/1997
Issue 4
01/2001

Trademark Information

ADC is a registered trademark of ADC Telecommunications, Inc.
4-26007-0050 Rev B
Direct Cross-Aisle Wiring ......................................................... 3
Zoned Cross-Aisle Wiring ......................................................... 3
Ratio of Cross-Aisle Ties.......................................................... 6
Panel Mounting ................................................................ 7
Installation Drawing............................................................. 7
Cross-Aisle Panel Cabling......................................................... 8
4.3.1
Cross-Aisle Tie Cable Type ................................................. 8
4.3.2
Cross-Aisle Tie Cable Connections ............................................ 8
Cross-Connects ................................................................ 9
4.4.1
Cross-Connect Wire Type .................................................. 9
4.4.2
Cross-Connect Length..................................................... 9
4.4.3
Cross-Connect Wiring .....................................................10
REASON FOR CHANGE
Non-technical update.
ADCP-80-325 • Issue 4 • January 2001
DSX-1 and DSX-1C
Cross-Aisle Panel
User Manual
 2001, ADC Telecommunications, Inc.
Page
Page 1

Advertisement

Table of Contents
loading

Related Manuals for ADC DSX-1

Summary of Contents for ADC DSX-1

  • Page 1: Table Of Contents

    Cross-Connect Wire Type ..........9 4.4.2 Cross-Connect Length............. 9 4.4.3 Cross-Connect Wiring .............10 CUSTOMER INFORMATION AND ASSISTANCE ..........13 INTRODUCTION This manual describes the ADC DSX-1 Cross-Aisle Panels and their use in multiple lineup DSX-1 Systems. Revision History ISSUE DATE REASON FOR CHANGE Issue 1...

  • Page 2: Admonishments

    1 GENERAL This manual describes ADC’s DSX-1 Cross-Aisle Panels and their application in multi-lineup DSX-1 Systems. This manual also provides complete instructions for installing the Cross- Aisle Panel in a bay. Procedures for mounting, cabling, and wiring the panels in the bay are included.

  • Page 3: Application

    3 APPLICATION Cross-Aisle Panels or space for these panels should be provided in every bay of a DSX multiple-lineup. All wiring is point-to-point with no multiples. ADC recommends one of the following Cross-Aisle Panel cable designs: • Direct wiring between like numbered bays as shown in Figure •...
  • Page 4 ZONE 2 ZONE 2 8384-A Figure 3. DSX-1/1C Cross-Aisle Panel Two Zone Wiring Table 1 shows point-to-point information for interconnecting three lineups with 20 bays each. In this example 200 cross-aisle circuits are provided in each bay with 50 circuit complements...
  • Page 5 3/19 151-200 2/04 1/14 151-200 2/09 1/19 151-200 2/04 3/04 101-150 2/09 3/09 101-150 2/04 3/14 1-50 2/09 3/19 1-50 3/04 1/14 51-100 3/09 1/19 51-100 3/04 2/14 151-200 3/09 2/19 151-200 (continued) Page 5 © 2001, ADC Telecommunications, Inc.

  • Page 6: Ratio Of Cross-Aisle Ties

    • Short cross-connect concept. Preferential assignment or software is used always to select the shortest possible cross-connect. Page 6  2001, ADC Telecommunications, Inc.

  • Page 7: Installation

    In a rear cross-connect system, the back of the Cross-Aisle Panel is used to connect cross- connect jumpers. The front is used to connect tie cables from a Cross-Aisle Panel in one lineup to a Cross-Aisle Panel in another lineup. Page 7 © 2001, ADC Telecommunications, Inc.

  • Page 8: Cross-Aisle Panel Cabling

    Cross-Aisle Panel wiring in typical multi-lineup systems. One recommended method of wiring is to connect the OUT terminals in one lineup to the IN terminals of the other lineup as shown in Figure Page 8  2001, ADC Telecommunications, Inc.

  • Page 9: Cross-Connects

    6. Always cross-connect from OUT to IN and IN to OUT. CROSS AISLE PANEL DSX JACK DSX JACK CROSS- CROSS- CONNECT CABLES CONNECT 85.00 FT. 8387-A (25.90 M) Figure 6. Typical Cross-Connect Tie Arrangement Page 9 © 2001, ADC Telecommunications, Inc.

  • Page 10: Cross-Connect Wiring

    JUMPER WIRE PAIRS CABLE BL-W ORIGINATING DSX LINEUP OR-W X-AISLE TL T OR-W BL-W 5 CONDUCTOR TWISTED JUMPER WIRE PAIRS BL-W TERMINATING DSX LINEUP 8388-A OR-W Figure 7. Typical DSX-1/1C Cross-Connect Tie Wiring Page 10  2001, ADC Telecommunications, Inc.
  • Page 11 This will allow the cross-connect to be dressed neatly with no strain and without interfering with any other portion of the bays. All cross-connect jumpers should use the horizontal wireways between bays, and the vertical wireways within the bays. Page 11 © 2001, ADC Telecommunications, Inc.
  • Page 12 E. ALL JUMPERS ORIGINATING IN THE UPPER HALF OF THE CROSS-CONNECT FIELD SHOULD ROUTE VIA THE UPPER HORIZONTAL WIREWAYS. ALL JUMPERS ORIGINATING IN THE LOWER HALF OF THE CROSS-CONNECT FIELD SHOULD ROUTE VIA THE LOWER HORIZONTAL WIREWAYS. 8389-A Figure 8. Typical DSX Cross-Connect Routing Page 12  2001, ADC Telecommunications, Inc.

  • Page 13: Customer Information And Assistance

    Contents herein are current as of the date of publication. ADC reserves the right to change the contents without prior notice. In no event shall ADC be liable for any damages resulting from loss of data, loss of use, or loss of profits and ADC further disclaims any and all liability for indirect, incidental, special, consequential or other similar damages.

This manual is also suitable for:

Dsx-1c

Table of Contents