Raider RDP-AG63 User Manual page 13

EN
Dear Customer,
Congratulations on the purchase of machinery from the fastest growing brand of electric, gasoline and
pneumatic machines- RAIDER. When properly installed and operating, RAIDER are safe and reliable machines
and work with them will deliver a real pleasure. For your convenience has been built and excellent service
network of 45 service station across the country.
Before using this machine, please carefully acquainted with these "instructions for use.
In the interest of your safety and to ensure proper use and read these instructions carefully, including the
recommendations and warnings in them. To avoid unnecessary errors and accidents, it is important that these
instructions will remain available for future reference to all who will use the machine. If you sell it to a new
owner "Instructions for Use" must be submitted along with it to enable new users to become familiar with
relevant safety and operating instructions.
Euromaster Import Export Ltd. is an authorized representative of the manufacturer and owner of the trademark
RAIDER.
Adress: Sofia City 1231, Bulgaria "Lomsko shausse" Blvd. 246, tel +359 700 44 155, ; www.euromasterbg.com;
e-mail: info@euromasterbg.com.Since 2006 the company introduced the system of quality management ISO
9001:2008 with scope of certification: Trade, import, export and servicing of hobby and professional electrical,
mechanical and pneumatic tools and general hardware. The certificate was issued by Moody International
Certification Ltd, England.
TECHNICAL DATA
parameter
Model
Rated power
Current
Frequency
Sound pressure Lp Uncertainty K=3
A
Sound power Lw Uncertainty K=3
A
Vibrations a Uncertainty K=1.5
h
No-load speed
Thread of the spindel
Inside diameter of the disc
Max diameter of the disc
Max tickness of the disc
Length of the spindel
Protection class
ORIGINAL INSTRUCTION MANUAL
dB(А)
dB(А)
unit value
- RDP-AG63
W 1200
V 230
Hz 50
86
97
m/s 8.20
2
min 9000
-1
mm M14
mm 22.23
mm 125
mm 6
mm 20
- II
Displayed items:
1. On / Off switch
2. Button for blocking the shaft
3. Auxiliary handle
4. Filter
5. Flange alignment
6. Guard.
7. Disc
8. Retainer nut
9. Brush replacement hole
10. A button to prevent accidentally
turn on
13