Raider RDP-AG63 User Manual page 15

15
balance. So you can control the grinding better and safer if unexpected situations arise.
3.6. Work with appropriate clothing. Do not operate with loose clothing or ornaments. Keep your hair, clothes
and gloves at a safe distance from rotating the grinding units. Robes, attire, long hair can be caught and carried
away by rotating units.
3.7. If it is possible to use external aspiration system, make sure it is switched on and functioning properly. Use
of the aspiration system reduces the risks due to the discharge dust at work.
4. Thoroughly respect to angle grinders.
4.1. Do not overload grinders. Use angle grinders only as intended. You will operate better and safer when using
the right angle grinder manufacturer in the specified range of load.
4.2. Do not use the angle grinder with a starting switch is damaged.
Angle grinder, which can not be excluded and included as intended by the manufacturer, is dangerous and
should be repaired.
4.3. Before you modify the settings of the angle grinder to replace work tools and additional accessories as well
as a long time when you will not use grinders, unplug the plug from the supply network. This measure eliminates
the danger of triggering the grinding inadvertently.
4.4. Keep grinding in places where they can be reached by children. Do not allow them to be used by persons
who are not familiar with how to work with them and have not read those instructions. When you are in the
hands of inexperienced users, grinders can be extremely dangerous.
4.5. Keep grinding their care. Check whether the mobile units operate impeccable, whether it spells, if there is
a broken or damaged item which distort or alter the functions of the grinding machine. Before using the angle
grinder, make sure that the damaged parts to be repaired. Many accidents are caused by poorly maintained
power tools and appliances.
4.6. Use the angle grinder, attachment, working tools according to the manufacturer's instructions. In doing
so must comply with specific operating conditions and operations to perform. Using grinders of various
applications provided by the manufacturer increases the risk of accidents.
5. Maintain.
5.1. Repairing your electric tools is best carried out only by qualified specialists in workshops RAIDER, which
used only original spare parts. Thus it ensuring their safe operation.
6. Guidelines for the safe handling, specific grinding purchased by you. General guidelines for safe operation
with a disc grinder and sandpaper, clean with wire brush and abrasive cutting disk.
6.1. This grinding can be used for grinding with carboflex drive and sandpaper, clean with wire brush, polishing
and cutting carboflex disk. Follow all instructions and warnings complying with technical parameters and the
adjusted images. Failure to follow the following instructions, the consequences may be an electric shock, fire
and / or severe injuries.
6.2. This angle grinder is not suitable for polishing. Carrying out activities for which the grinding is not
intended, may be dangerous and cause injuries.
6.3. Do not use additional devices which are not recommended by the manufacturer for this particular power.
The fact that you can attach to specified device or machine working tool does not ensure safe working with him.
6.4. Allowable speed of rotation of the working tools must be at least equal to the inscribed plaque on the
grinding speed of rotation. Working tools that rotate at a higher speed than the maximum indicated on the
angle grinder can break and pieces of them high speed.
6.5. The outer diameter and thickness of the working tools must comply with the particulars specified in the
technical characteristics of your angle grinder. Working tools with inappropriate size may not be shielded as