Raider RDP-AG63 User Manual page 18

www.raider.bg
18
10.1. Do not use too large sheets of sandpaper, follow the manufacturer's instructions for the size of sandpaper.
10.2. Sandpaper sheets to be made outside the receiving disk can cause injury and lead to blockage and rupture
of sandpaper or the occurrence of recoil.
11. Specific instructions for the safe operation of cleaning with wire brushes.
11.1. Do not forget that in the normal operation of the wire brush fall staples. Do not overload the wire brush by
squeezing it too hard. Scatter wire brush from staples can easily penetrate clothing and / or skin.
11.2. Prior to make sure that the wire brush is not touching the guard. Cupped disc and wire brushes can
increase its diameter due to the power of jamming and centrifugal forces.
12. Additional instructions for safe operation.
Work with goggles.
12.1. Use appropriate instruments to find any hidden beneath the surface pipelines, or contact the appropriate
local supply company. Into contact with the wires under tension can cause fire or electric shock. Pipeline
damage can lead to explosion. Deterioration of water has the effect of major material damage and may cause
electric shock.
12.2. If the supply voltage is interrupted (for example due to blackouts, or if the plug is removed from contact)
unblock the trigger switch and plug it into position - off ". This will prevent uncontrolled inclusion of angle
grinders.
12.3. In the processing of stone materials, work with external dust-extraction system. Using suction of the
powder system limits damage to your health caused by dust.
12.4. During operation keep grinding hard with both hands and lend a stable position of the body. With both
hands, grinding water safer.
12.5. Provide work piece. Detail, and attach with appropriate appliances or braces is anchored more firmly and
securely than if you hold it by hand.
12.6. Keep your workplace clean. Mixtures of different materials are particularly hazardous. Fine shavings from
light metals can be ignite or explode.
12.7. Do not use the angle grinder when the power cord is damaged. If during operation the cable is damaged,
do not touch. Immediately disconnect the plug from the outlet.
Damaged power cables increase the risk of electric shock.
Failure of the considered instructions may lead to electric shock, fire and / or severe injuries.
13. Functional description and purpose of the grinding machine.
Is a manual power grinder with insulation class II. He is powered with the help of a collector single-phase motor
whose speed is reduced by means of a conical gear with curved teeth. Angle grinder is designed for cutting,
grinding and coarse wire brushes to clean metal and stone surfaces without using water. With special accessories
for grinding, grinding can be used for sanding with sandpaper. Not be used for the grinding operations other
than its intended purpose.
14. Information emitted noise and vibration.
The values are measured according to EN 60745.
Sound pressure level: Lp
Sound power level: Lw
Work with earmuffs!
Level of vibration a = 8.20 m/s
h
In rough surface grinding and polishing: vibrations generated: a
uncertainty K = 1,5 m/s
= 86 dB (A)
A
= 97 dB (A)
A
2
.
2
= 13 m/s ,
2
h