Table of Contents
Advertisement
Manage the Hubs using the AnywhereUSB Manager
By default, the power cycle (powered off and then powered on) lasts 3 seconds. For more information,
see
Specify search, response, and keepalive intervals for a
Note
In addition, you can power cycle a port on a Hub from the web UI. Any USB device connected to
that port is powered off and then powered on. See
UI.
1.
Open AnywhereUSB
2. Expand the Hub and group to which the USB device is connected.
3. Right-click on the USB device and click Power Cycle Device. The power supplied to the port to
the USB device is turned off and then turned on.
Manage Hub credentials
You can manually add, update, or remove the certificate associated with a Hub on the
AnywhereUSB Manager. The Hub and the AnywhereUSB Manager must have matching certificates
to be able to communicate.
This feature works with the Auto-register Hub Cert option in the Preferences dialog. You should
determine whether you want to
AnywhereUSB Manager.
Enable and disable the auto-register Hub certificate
You can choose to automatically find Hubs connected to the network when AnywhereUSB Manager
launches.
1.
Open AnywhereUSB
2. Choose File > Preferences. The Preferences dialog appears.
3. Click the Setup tab.
4. Determine whether you want to automatically register a Hub with the AnywhereUSB Manager.
Select Auto-register Hub Cert to automatically register a Hub certificate with the
n
AnywhereUSB Manager. This is the default.
De-select Auto-register Hub Cert to ensure that the Hub certificates are not
n
automatically registered. In this case, you must manually register a certificate for each
Hub.
5. Click Save.
Update a Hub certificate
You can choose to manually update a Hub's certificate and register a new certificate with the
AnywhereUSB Manager. This ensures that the Hub and the AnywhereUSB Manager can
communicate.
1.
Open AnywhereUSB
2. Choose Configure > Manage Hub Credentials. The Manage Hub Credentials dialog appears.
3. Select the Hub for which you want to update the certificate.
4. Click Update. The Choose a credential file window appears.
5. Browse for the new certificate file and click Open. The file should have a .pem extension.
AnywhereUSB® Plus User Guide
Cycle the power to a port on a Hub from the web
Manager.
automatically register a Hub's certificate
Manager.
Manager.
Manage Hub credentials
Hub.
with the
61
Advertisement
Table of Contents
