Hub Info - Digi AnywhereUSB Plus User Manual

Configure the AnywhereUSB Manager from the command line

hub info

Purpose
Displays information about the Hubs. For more information, see
pane.
Syntax
>awusbmanager hub info,<hub name>
The <hub name> is the address of the Hub for which you want to display information. The address is
required.
Examples
Run the list command to determine Hub's address.
AnywhereUSB Manager, below are the available devices:
AW02-000001 "HUB-000001" (AW02-000001.local.:18574)
Group 2 (AW02-000001.2) (In-use by you)
Group 1 (AW02-000001.1) (In-use by you)
U3 Cruzer Micro (AW02-000001.1101)
* means Autoconnect enabled, + means Autoconnect inherited
Auto-Find: enabled
Autoconnect All: disabled
AnywhereUSB Manager not running as a service
Run the hub info command.
>awusbmanager hub info,AW02-000001
Information about the Hub displays.
NAME: AW02-000001
LOCALNAME: HUB-000001
MODEL: AnywhereUSB 2 Plus
VERSION: 3.0.0.54 awusb dby-3.0.0.54 01/03/2019 16:44:25 CST 20190103224522
STATE: Active (secure)
ADDRESS: AW02-000001.local. (SSL Subject:/C=US/ST=Minnesota/O=Digi
International Inc/CN=unknown ,Issuer:/C=US/ST=Minnesota/O=Digi International
Inc/CN=unknown) (10.10.74.xxx)
PORT: 18574
CONNECTED FOR: 22115 sec
CONNECTION ID: 1
INTERFACE: eth0
SERIAL NUMBER: AW02-000001
AUTOCONNECT: disabled
AnywhereUSB® Plus User Guide
AnywhereUSB Manager Hub Status
hub info
765