Console Port - Digi AnywhereUSB Plus User Manual

Console port

AnywhereUSB Plus devices have a single serial port that provides access to the command-line
interface.
Use an RS232 DB9 console cable to establish a serial connection from your AnywhereUSB Plus to your
local laptop or PC. You can then use a terminal emulator program to establish the serial connection.
The terminal emulator's serial connection must be configured to match the configuration of the
AnywhereUSB Plus device's serial port. The default serial port configuration is:
Baud rate: 115000
n
Data bits: 8
n
Parity: None
n
Stop bits: 1
n
Flow control: None
n
AnywhereUSB® Plus User Guide
215