Manage Hub Credentials; Enable And Disable The Auto-Register Hub Certificate - Digi AnywhereUSB Plus Series User Manual

Manage the Hubs using the AnywhereUSB Manager
4. Enter the following:
Search for Hubs every .... sec: Specifies how often the AnywhereUSB Manager
n
searches the local network to discover AnywhereUSB® Plus Hubs and refresh the
AnywhereUSB Manager display.
Note
AnywhereUSB Manager.
Wait for Hub response for .... sec: Specifies the time interval from the last discovery
n
refresh that the AnywhereUSB Manager will stop looking for more Hubs.
Send Keep-Alive every ... sec: Specifies how often the AnywhereUSB Manager sends
n
a keepalive request to the Hubs connected to the network. This impacts network
utilization because each AnywhereUSB Manager will send one packet at this interval to
each Hub to which it is connected.
Keep-Alive Timeout ... sec: Specifies how long the AnywhereUSB Manager should
n
wait for a keepalive response. When the value of the response time is reached, the
Manager decides that a Hub is no longer available, and the computer is disconnected
from all groups and devices on that Hub.
l
l
l
5. Click Save.

Manage Hub credentials

You can manually add, update, or remove the certificate associated with Hub on the
AnywhereUSB Manager. The Hub and the AnywhereUSB Manager must have matching certificates
to be able to communicate.
This feature works with the Auto-register Hub Cert option in the Preferences dialog. You should
determine whether you want to
AnywhereUSB Manager.

Enable and disable the auto-register Hub certificate

You can choose to automatically find Hubs connected to the network when AnywhereUSB Manager
launches.
1. Open AnywhereUSB
2. Choose File > Preferences. The Preferences dialog appears.
AnywhereUSB® Plus User Guide
You cannot manually perform a refresh of the Hubs displayed in the
The keepalive timeout value would need to be longer if the network has more
latency (such as a cellular or satellite link), or an internet link with unreliable packet
delivery.
If the value is too short, devices will be disconnected, which may have an adverse
affect on some devices, such as USB memory.
If the value is too long, Hubs that are removed from the network will not be noticed
as gone for a long time, and devices that are no longer connected will be
unresponsive for a long time.
automatically register a Hub's certificate
Manager.

Manage Hub credentials

with the
42