Digi AnywhereUSB Plus User Manual page 3

Revision Date
L July 2021
AnywhereUSB® Plus User Guide
Description
Added ability to override or edit SSH server options.
n
Added options for filtering Wi-Fi scanner results based off of MAC
n
addresses or RSSI signal strength.
Added options for sending local device event logs to Digi Remote
n
Manager.
New system time CLI command for manually setting the local
n
date and time.
New firewall packet filter options to allow/deny packets based off
n
of a range of source or destination MAC addresses.
New monitoring metrics upload CLI command to send on-
n
demand health metrics to Digi Remote Manager.
Added support for the configuration of custom scripts that will be
n
run manually, and a new system script start CLI command to
run manual scripts.
Added datapoint.upload_multiple function to digidevice python
n
module for uploading multiple datapoints to DigiRM at once.
Added clear dhcp-lease command to remove all dynamic DHCP
n
leases or certain DHCP leases based on MAC address or IP
address.
Added speedtest command for performing on-demand iPerf or
n
nuttcp speedtests.
Local users are now required to be assigned to an authentication
n
group.
New Network → Advanced → Sequential DHCP address allocation
n
configuration setting for controlling if DHCP addresses are
assigned sequentially or randomly (disabled by default).
Added ability to control if DHCP addresses are assigned
n
sequentially or randomly (disabled by default).
Added 802.1x port-based network access control, configurable
n
per network interface.
Added Safety warnings.
Updated Change the client
Added complete section Interfaces.
ID.
3