Digi AnywhereUSB Plus User Manual page 5

Revision Date
AnywhereUSB® Plus User Guide
Description
Release of Digi AnywhereUSB Plus firmware version 21.5:
Wi-Fi enhancements:
n
Added support for WPA3 Wi-Fi encryption:
l
o WPA2/WPA3 Personal
o WPA3 Enhanced Open
o WPA3 Personal
Added support for WPA and WPA/WPA2 mised mode with
l
TKIP.
Cellular enhancements:
n
Added support for modem firmware update to the Admin CLI.
l
Added support for over-the-air (OTA) modem firmware
l
update to check, list, and update to new modem firmware
from the Digi firmware server.
Added the ability to scan for cellular carriers on the Modem
l
status page and the ability select a particular PLMN/network
to use.
Added commands for over-the-air (OTA) system firmware update
n
to check, list, and update to new firmware from the Digi firmware
server.
Added a show dns command to the Admin CLI to display active
n
DNS servers and their associated interface.
Added a show ntp command to the Admin CLI to display the
n
status of the NTP service.
Expanded Port forwarding option to support a range of ports,
n
including one-to-one and many-to-one port mappings.
Added options to control packet filtering for the network
n
analyzer.
VPN enhancements:
n
IPsec enhancements:
l
Added support for multiple remote endpoints and the
o
ability to use round-robin or to randomly select an
endpoint to establish a tunnel to.
o Added configurable options to control IKE transmit
interval, tunnel retry interval, and tunnel retry timeout.
LDAP enhancements:
l
o Added a login attribute to provide the ability to match the
attribute set on an Active Directory server.
SureLink enhancements
n
Added the ability to configure how many times a SureLink
l
test must run, and must fail, before the interface is restarted
or the device is rebooted.
5