Digi AnywhereUSB Plus User Manual page 152

Interfaces
IPv4 DNS server(s)
IPv6 surelink
IPv6 address
IPv6 gateway
IPv6 MTU
TX bytes
RX bytes
Uptime
SIM
---
SIM Slot
SIM Status
IMSI
ICCID
SIM Provider
4G
--
RSRQ
RSRP
RSSI
SNR
>
Unlock a SIM card
A SIM card can be locked if a user tries to set an invalid PIN for the SIM card too many times. In
addition, some cellular carriers require a SIM PIN to be added before the SIM card can be used. If the
SIM card is locked, the AnywhereUSB device cannot make a cellular connection.
Command line
To unlock a SIM card:
1. Log into the AnywhereUSB Plus command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the Admin CLI prompt, use the
> modem puk unlock puk_code new_pin modem_name
>
For example, to unlock a SIM card in the modem named modem with PUK code 12345678, and
set the new SIM PIN to 1234:
> modem puk unlock 12345678 1234 modem
>
AnywhereUSB® Plus User Guide
: 245.144.162.207, 245.144.162.208
: passing
: 11f6:4680:0d67:59d2:552b:3429:81a8:f1ea
: ff50:d95d:7e98:abe8:3030:9138:4f25:f51b
: 1500
: 127941
: 61026
: 10 hrs, 56 mins (39360s)
: 1
: ready
: 61582122197895
: 26587628655003992180
: AT&T
: Good (-11.0 dB)
: Good (-93.0 dBm)
: Excellent (-64.0 dBm)
: Good (6.4 dB)
modem command to set a new PIN for the SIM card:
Wide Area Networks (WANs)
152