View Current Connections To The Hub; Manually Configure The Pc And Assign An Ip Address To A Hub - Digi AnywhereUSB Plus User Manual

Configure the AnywhereUSB in the web user interface

View current connections to the Hub

You can view information about current connections to the Hub in the AnywhereUSB Status page.
For more information, see
1. Open the web
2. Select Status > Services > AnywhereUSB. The AnywhereUSB Status page appears.
USB Devices: Expand the USB Devices section to display information about the devices
n
connected to the Hub.
Client Connections: Expand the Client Connection section to display information
n
about the computers connected to the Hub.
Manually configure the PC and assign an IP address to a Hub
You can manually assign an IP address to the Hub.
Prerequisites
An Ethernet cable
n
A power supply
n
Determine the IP address that you want to assign to the Hub.
n
To configure your laptop and assign an IP address to the Hub:
1. On your PC, navigate to the Ethernet network settings dialog.
2. Click the Internet Protocol Version 4 (TCP/IPv4) parameter.
3. Click Properties. The Internet Protocol Version 4 (TCP/IPv4) Properties dialog appears.
4. Select Use the following IP address.
AnywhereUSB® Plus User Guide
AnywhereUSB Status
UI.
must be connected to the Hub and a network.
must be connected to the Hub and the Hub powered on.
View current connections to the Hub
page.
101