Table of Contents
Advertisement
Configure the AnywhereUSB in the web user interface
Item
configuration icon
Port
Group
USB
Manufacturer
Product
Serial number
Cycle
Client Connections
Click to expand this section and display information about the groups connected to the
AnywhereUSB.
Item
configuration icon
Group
Client ID
IP Address
Rename a Hub and the groups in a Hub
A default name is assigned to a Hub and to the groups in the Hub. These names are associated with
the physical Hub and groups on the Hub, and can be changed in theweb user interface.
Note
A USB device does not have a name that can be changed. However, a local name can be
assigned to a USB device in the AnywhereUSB Manager. See
AnywhereUSB® Plus User Guide
Description
Click the (configuration) icon in the upper right corner of the page
to access the AnywhereUSB Configuration page. See
AnywhereUSB Configuration page
The number of the USB port to which the USB device is connected.
The group to which the USB port is assigned.
The USB technology of the connected device: 2.0, 2.1, 3.0, or 3.1.
Name of the USB device manufacturer, if supplied by the device.
Name of the USB product, if supplied by the device.
The serial number of the USB device, if supplied by the device.
Click Cycle to power off the port for 3 seconds, and then power it
back on. For more information, see
Hub from the web
UI.
Description
Click the (configuration) icon in the upper right corner of the page
to access the AnywhereUSB Configuration page. See
AnywhereUSB in the web user interface
A group to which the client has connected. See
or USB device in the
AnywhereUSB Manager.
The unique identifier of the client that has connected to this group.
For more information, see Client ID.
The network address of the client's computer.
Rename a Hub and the groups in a Hub
for more information.
Cycle the power to a port on a
Configure the
for more information.
Connect to a group
Assign a local name to a
USB device.
95
Advertisement
Table of Contents
