Table of Contents
Advertisement
Configure the AnywhereUSB in the web user interface
Note
You can have up to 255 client IDs in the client list.
Assign client IDs to USB ports on the Hub
The client IDs are assigned to groups of USB ports on the Hub. When a computer
in the AnywhereUSB Manager, the computer has access to all of the ports in the group and the
devices connected to those ports. No other computer is allowed to access any of the devices in the
group. A computer can connect to more than one group at a time.
Configure a client ID
n
Manually add a client ID
n
Remove a client ID
n
Configure a client ID
You can assign a descriptive name to a client ID in the client list, and update the groups the client ID is
allowed to access. The client ID can access all of the ports in the specified groups, as defined in the
Group Settings
section.
Note
If needed, you can also
1.
Open the web
2. Select System > Configuration > AnywhereUSB Configuration. The AnywhereUSB
Configuration page appears.
3. Expand the Client Settings section.
4. From the client list, select the client ID that you want to configure. Information about the
selected client ID displays in the Settings for Client section.
5. Click Edit.
6. In the Description field, enter a descriptive name for the client ID.
7. Click the check box next to a group to which the computer is allowed access. As you select
groups, the selected group numbers appear in the Group Access field in the Settings for
Client section. You can also manually enter group numbers in the Group Access field.
Note
The Certificate value is Unavailable until certificates have been exchanged between the
computer and the Hub. After this occurs, the Certificate value is updated to Available.
8. Click Apply to save the changes.
Manually add a client ID
You can manually add client IDs to the client list. When a computer searches for Hubs, any computer
with a client ID on the client list can connect to the Hub.
Note
You can have up to 255 client IDs in the client list.
After you have added a client ID, the certificate is unavailable until the first time a computer with the
new client ID connects to the Hub. For more information about client IDs, see Client ID.
When the computer connects to the Hub for the first time, the credentials are exchanged between the
computer and the Hub. After the initial connection, only that computer with the client ID and unique
identity certificate is able to connect to the Hub. Any other computer with the same client ID will be
AnywhereUSB® Plus User Guide
add additional client IDs
UI.
Configure and manage client IDs
to the list.
connects to a group
97
Advertisement
Table of Contents
