View Current Connections To The Hub; Configure Network Services - Digi AnywhereUSB Plus Series User Manual

Administrators: Configure the AnywhereUSB® Plus in the web user interface

View current connections to the Hub

You can view information about current connections to the Hub in the Connections Management
page.
1. Open the web
2. Click Connections in the Management section. The Connections Management page appears.
Local Address: The IP address of the Hub and the TCP port number of a network
n
service running on the Hub. The TCP Port information is available on the
Service Configuration
Remote Address: The IP address of the computer connected to the Hub.
n
Service: A description of the service connected to the Hub.
n
3. Click Refresh to update the information in the screen.

Configure network services

You can configure network services options in the Network Service Configuration page. All network
services options are selected by default.
For each service you must specify the TCP port number. The ports are configured by default, and
changing the default value is not recommended.
1. Open the web
2. Click Network Services in the Configuration section. The Network Service Configuration
page appears.
AnywhereUSB® Plus User Guide
UI.
page.
UI.

View current connections to the Hub

Network
65