GRAPHTEC FC2250 Service Manual page 3

No. Date issued
1 07.10.10
2 08.01.09 Parts number for the vacuum panels were corrected.
3 08.03.18 The dip switch setting for the Keyboard and Sensor Test Mode was corrected.
4 08.03.18 Step (8) of figure was corrected.
5 08.08.19 Parts number for the 2-pen board was corrected.
6 08.09.18 Locations for the double-sided adhesive tapes were corrected.
Rank of parts was added.
7 08.10.28
8 08.11.10 The dip switch setting for the Keyboard and Sensor Test Mode was corrected.
9 08.11.25 The display menu was corrected.
10 08.11.25 Explanation for the display menu and the display menu were corrected.
11 08.11.25 Rank for the item No.16 and No.17 were corrected.
12 09.04.16 Parts number for the main board was corrected.
13 09.10.07 The dip switch setting for the gain input mode was corrected.
14 09.10.07 The Y flexible cable assembly was add to the parts list.
15 09.10.07 The adjusting procedures were added.
16 09.10.07 The procedure for the gain input mode was added.
17 09.10.07
The dip switch setting for the emergency mode was added.
18 09.10.07 The procedure for the model selecting mode was added.
19 09.10.07 The silicon grease was added to the tool list.
20 09.10.07 The procedure for the disassembly and adjustment were added.
21 10.07.05 Parts name for the X home sensor board was corrected.
22 10.07.05 Parts name for the Y home sensor board was corrected.
23 10.07.05 Parts number for the writing panels were corrected.
24 10.07.05 Parts number was added for the Pen Block Assembly.
25 10.07.05 Parts number was added for the Y slider SH.
26 10.07.05 Parts number was added for the Pen Block Plate SH.
27 10.07.05 Parts number was added for the Pen Block Cover PM.
28 10.07.05 Replacement procedure was added for the Pen Block.
29 10.07.05 The Dip-Switch setting was added for the Pen Block (PM)
30 11.09.20 Parts number for the RMS HOOD was corrected.
31 13.07.02 Rank for the item No.2 was corrected.
32 13.12.13 The note was added for the home position adjustment.
33 13.12.13 The wiring diagram was corrected.
34 13.12.16 Parts number for the X cable was corrected.
35 13.12.16 Parts number for the FC2250 Pen Block Assembly was corrected.
36 13.12.16 Parts number for the Control Cable was corrected.
37 13.12.16 Parts number for the Power Supply Relay Board was corrected.
38 13.12.16 Parts number for the Notched Synchrony Belt was corrected.
39 13.12.16 Parts number for the X Motor was corrected.
40 13.12.16 Parts number for the X Flexible Cable 60/120 was corrected.
41 13.12.16 Parts number for the X Flexible Cable 180 was corrected.
42 14.01.26 The table of pressure was corrected (No.2: from 24g to 48g)
43 15.04.20 Parts number for the Y motor was corrected.
44 15.05.21 Parts number for the F22 pulley was added.
FC2250-UM-251-9370
HISTORY OF REVISIONS
Description of revision
First Printing
i
Page Edition
All 01
10-1 02
8-4, 8-17 03
8-17 03
5-1 04
7-14 05
10-1 to 10-12 06
8-4 07
8-6,8-8,8-9 07
8-19 07
10-1 07
5-1 08
8-4 09
5-1, 10-10 09
8-2 to 8-5 09
8-12 09
8-9 09
8-25 09
6-1 09
7-1 to 7-70 09
5-1, 10-6 10
5-1, 10-10 10
10-1 10
5-1, 10-10 10
10-9 10
10-9 10
10-9 10
7-26 10
8-8 10
10-10 11
10-1 11
8-14 11
11-1 11
10-1 11
10-1 11
10-4 11
5-1, 10-5 11
10-6 11
5-1, 10-6 11
5-1, 10-6 11
5-1, 10-6 11
8-7, 8-11 11
5-1, 10-10 12
10-9 12