The X Or Y Belt Was Replaced; The Y Bar Was Removed - GRAPHTEC FC2250 Service Manual

8.2.7 The X or Y belt was replaced

When the X or Y belt was exchanged, an electric adjustment is executed by the following procedure.

8.2.8 The Y bar was removed

When the Y bar was removed, an electric adjustment is executed by the following procedure.
FC2250-UM-251-9370
8.5 Set the DIP Switches setting to the adjustment mode
8.9 Adjusting the Home Position
8.12 Adjusting the Distance Accuracy and the perpendicularity
8.5 Set the DIP Switches setting to the normal mode
End of Adjustment
8.5 Set the DIP Switches setting to the adjustment mode
8.9 Adjusting the Home Position
8.12 Adjusting the Distance Accuracy and the perpendicularity
8.5 Set the DIP Switches setting to the normal mode
End of Adjustment
8. ELECTRICAL ADJUSTMENTS
8-5