Optional Parts; Manufacturer's Identification Data; Identification Plate; Permitted Uses - DEPURECO TB Series Instruction And Maintenance Manual

5. Suction inlet
6. Dust/ Debris Bin
7. Bin handle
8. Accessories basket
9. Blower
10. Vacuum meter
1.3

Optional parts

A wide range of optional accessories is available from DEPURECO depending on
the intended use of the vacuum.
1.4

Manufacturer's identification data

DEPURECO INDUSTRIAL VACUUMS S.r.l.
Corso Europa 609 - 10088 Volpiano (TO) - ITALY
phone +39 011 98 59 117 - fax +39 011 98 59 326 | VAT NO. 02258610357
e-mail: depureco@depureco.com - website: www.depureco.com
1.5

Identification plate

The data on the vacuum identification plate must be referred to in any
correspondence with the manufacturer or the dealer.
1.6

Permitted Uses

These vacuum cleaners are designed and built according to the 2014/34/EU
(ATEX) Directive for an exclusive professional industrial use; either way,
for any non-domestic use,
This vacuum cleaner is suitable for the cleaning and the collection of solid
materials, only in covered areas. This vacuum cleaner is designed to collect
combustible dust and/or dry particles in Zone 222 classified atmospheres
with the following limitations:
Minimum Ignition Energy (MIE) of the dust >3mJ
Kst-Value of the dust <300 bas m/s (St1, St2)
The vacuum cleaner was conceived to be used by only one operator.
In accordance with the Directive 1999/92/EC, whenever in the presence of
combustible dust and/or flammable gas, it's the responsibility of the
Page 6 of 38