Wear appropriate PPE (dust mask, latex gloves, goggles, etc.).
Proceed as follows to replace the filter:
-
Switch the vacuum off by positioning the main switch to "O"
-
Disconnect the vacuum cleaner from the power socket
-
Remove the bin
-
From the lower side of the filter chamber, release the clip and remove
the retaining pin of the cage from the filter shaking lever
-
Unlock the two locking hooks on both sides
-
Remove the vacuum's cap
-
Remove the HEPA filter and/or the S.P. cleaning system (if provided)
-
Slip out the filter and place all components on a work bench
-
Loosen the fastening clip (H), remove the filter from its support and,
using scissors, cut the lower belts that clamp it to the filter's cage
Page 30 of 38