Related Manuals for DEPURECO TB Series
Summary of Contents for DEPURECO TB Series
- Page 1 INSTRUCTION AND MAINTENANCE MANUAL SERIES ATEX Z22 II3D TB M Z22 TB T Z22 TB PLUS Z22...
-
Page 2: Table Of Contents
TABLE OF CONTENTS: 1. INFORMATIVE SECTION Foreword ......................... 3 Main parts ......................5 Optional parts ....................6 Manufacturer's identification data ..........6 Identification plate ..................6 Permitted Uses ....................6 Authorised environmental conditions ..........7 Noise level......................7 Technical data ....................8 1.10 Warranty ......................... -
Page 3: Informative Section
IMPORTANT - The DEPURECO term and logo in this document refer to and are the property of DEPURECO INDUSTRIAL VACUUMS S.r.l. This document remains the exclusive property of DEPURECO S.r.l. Full or... - Page 4 In the event it is lost or damaged, you can request another copy from DEPURECO INDUSTRIAL VACUUMS S.r.l. (henceforth shortened to DEPURECO). The technical information contained in this manual is exclusive property of DEPURECO and must be considered confidential.
-
Page 5: Main Parts
With reference to Regulation 1907/2006/EC (REACH), DEPURECO hereby declares that no Substances of Very High Concern - (SVHC) included in the Candidate List, are contained in its products. This manual should be kept in a place accessible to all personnel in charge with operating and performing maintenance on the vacuum cleaner. -
Page 6: Optional Parts
8. Accessories basket 9. Blower Vacuum meter Optional parts A wide range of optional accessories is available from DEPURECO depending on the intended use of the vacuum. Manufacturer's identification data DEPURECO INDUSTRIAL VACUUMS S.r.l. Corso Europa 609 - 10088 Volpiano (TO) - ITALY phone +39 011 98 59 117 - fax +39 011 98 59 326 | VAT NO. -
Page 7: Authorised Environmental Conditions
employer to carry out the classification of the Zone and to choose a device appropriate category (According definition given 2014/34/EU Directive. Any other use is considered IMPROPER. Authorised environmental conditions To ensure the correct operation, the vacuum cleaner must be kept away from atmospheric agents (rain, hail, snow, fog, dust in suspension, etc.) in an area with a room temperature range between 5°... -
Page 8: Technical Data
Technical data U.M. TB M Z22 TB T Z22 TB PLUS Z22 Weight* [Kg] Overall [mm] 550x620x1400 dimensions** Voltage / [V]- 230 I 50/60 400 - 50/60 Frequency [Hz] [kW - Power 1,8 – 2,4 2,2 - 3 Maximum vacuum [mBar] Air flow rate [m³/h]... -
Page 9: Warranty
DEPURECO shall not be held liable for any injuries to persons or damage to objects caused by misuse or improper use of the vacuum. -
Page 10: Safety Section
In the event of equipment, procedures, work methods or techniques not expressly provided for by DEPURECO being used, it is crucial to ensure beforehand that there are no dangers for oneself and the others. Nevertheless, DEPURECO shall not be held liable. -
Page 11: Safety Recommendations
DEPURECO from any liability. Each section lists further safety measures specific to the various functions. WARNING! Setting to work – connection to the power supply Make sure there is no evident sign of damage to the vacuum cleaner before starting work. - Page 12 (superficial antistatic properties are not accepted). The use of original DEPURECO accessories is recommended. Verify electric continuity with an ohmmeter: 1. Between the inlet and the ending part of the vacuum’s accessories: The resistance measured must be inferior to 100MΩ...
-
Page 13: Safety Plates And Symbols
Clean them using a cloth with water and soap. Do not use solvents, naphtha or petrol. Request replacements for damaged plates from DEPURECO. If a plate is located on a component that is being replaced, make sure to fit the old plate to the new component. -
Page 14: Residual Risks
Read carefully the instructions on the packaging before handling the vacuum cleaner Residual risks DEPURECO recommends complying with instructions, procedures recommendations in this manual and with the safety standards in force. Page 14 of 38... -
Page 15: Applied Directives
Warning! The removal of safety plates from the vacuum and/or its components and packaging is strictly prohibited. DEPURECO shall not be held liable for the vacuum's safety in the event of failure to comply with this prohibition. Applied Directives The following directives apply to the vacuum cleaner described in this... -
Page 16: Unpacking
The instructions for transporting and unpacking the vacuum correctly are shown on the packaging as well. The following instructions also indicate the operations to be undertaken should vacuum need re-packed unpacked after subsequent transportation. Dimensions of packed vacuum cleaner: 170 cm The vacuum cleaner must be lifted and handled exclusively The vacuum cleaner must be lifted and handled exclusively using a forklift having suitable load bearing capacity. - Page 17 remove the staples that fix the carton packaging to the pallet with the aid of a screwdriver remove the carton completely loosen and remove the fastening screws and brackets from both sides The cardboard packaging can be recycled. To protect the environment, make sure to dispose it off in specialised collection centres.
-
Page 18: Installation
In the event of one or more components being damaged, do not continue with installation, inform DEPURECO about the anomaly and agree upon action to be taken. The vacuum cleaner is already fitted with an appropriate filter intended... - Page 19 Note: the flexible tube and the relevant end-pieces and accessories are not included with the STANDARD model. Contact your dealer (or DEPURECO) for information regarding the various types of OPTIONALS that can be used on this specific model.
-
Page 20: Operation Section
4. OPERATION SECTION Description of the controls Warning! The vacuum can be used solely by authorised personnel after having read these use and maintenance instructions. The user of the equipment and the maintenance technician, who carry out operations on the vacuum, must be adequately educated, informed and trained, in compliance with the occupational safety standards in force and, during various... - Page 21 Warning! Before inserting the plug, ensure that the voltage of the power supply line corresponds to the one indicated on the vacuum's identification plate. Ensure that the power plug is inserted into the socket correctly. Make sure the hose is properly inserted and locked in the suction inlet. Make sure the bin.
- Page 22 If dust comes out of the silencer the filter could be damaged. In this case it’s necessary to immediately switch the vacuum cleaner off and verify the cause, Use the handles on the back of the machine to move the vacuum cleaner. Caution! While the device is running, prevent the flexible hose from rolling up or kinking.
-
Page 23: Emptying The Bin
Warning! If the vacuum cleaner doesn’t operate correctly after the cleaning of the filter, it’s possible that the filter is clogged and has to be replaced. Emptying the bin Warning! Wear appropriate PPE (dust mask, latex gloves, goggles, etc.). Depending on the type and quantity of material being vacuumed, it is necessary to periodically check the bin to avoid filling it excessively. - Page 24 Switch the machine off block the vacuum cleaner by means of the lever located on the swivelling wheel unlock the container by lifting the special handle. remove the bin using the handle empty the bin in a dedicated container for waste disposal Page 24 of 38...
-
Page 25: Inserting And Locking The Bin
Warning! If the bin weighs more than 15 Kg, at least two people are needed to empty it. Waste disposal must take place in accordance with the laws in force in the country of use of the vacuum cleaner - for Italy Legislative Decree 152/2006 and amendments Inserting and locking the bin Follow the steps below to insert and lock the container:... -
Page 26: Storage - Decommissioning
lock the container under the filter chamber by lowering the special handle and make sure it is locked Warning! Crushing hazard for the upper limbs during insertion and locking of the dirt container under the vacuum cleaner. Never place your hands between the vacuum and the dirt container while inserting and locking the latter under the vacuum cleaner. -
Page 27: Maintenance Section
5. MAINTENANCE SECTION Warning! Special vacuum maintenance must carried solely specialised technicians authorised by the DEPURECO dealer. Informative notes This section describes checks routine maintenance operations required to ensure proper vacuum operation. Maximum reliability minimum maintenance costs result planned maintenance and inspection schedule carefully followed throughout the entire lifespan of the vacuum. - Page 28 Warning! All the operations described above must be carried out with the plug disconnected from the socket. Before starting maintenance cleaning operation, wear suitable PPE (protective clothing, goggles and/or gloves, etc.) according to the work to be done. Place a sign on the vacuum with the message: “MACHINE UNDER MAINTENANCE DO NOT START”...
-
Page 29: Replacing The Filter
Before every work shift Check that the power cord and the plug are not damaged: replace them immediately if there are any signs of wear, using a cord of the same type (information DEPURECO). This operation sole responsibility of an electrician. - Page 30 Wear appropriate PPE (dust mask, latex gloves, goggles, etc.). Proceed as follows to replace the filter: Switch the vacuum off by positioning the main switch to "O" Disconnect the vacuum cleaner from the power socket Remove the bin From the lower side of the filter chamber, release the clip and remove the retaining pin of the cage from the filter shaking lever Unlock the two locking hooks on both sides Remove the vacuum’s cap...
-
Page 31: Replacing The Hepa Filter (If Provided)
Remove the filter, put it in a plastic bag, seal it and dispose it of according to the current legislation on the type of material extracted To reassemble the filter, operate in reverse order: Insert the new filter in the support ring and lock it by means of the fastening clip (H) lock the filter to the cage by tying the special laces on the bottom side... -
Page 32: Troubleshooting
Position the vacuum cleaner’s head, then lock it with the appropriate locking hooks Connect the vacuum cleaner to the mains Switch the vacuum cleaner on by positioning the main switch to "I", then check to make sure it works properly. EXCLUSIVELY USE FILTERS MANUFACTURED BY DEPURECO Troubleshooting FAULT POSSIBLE SOLUTION... -
Page 33: Scrapping
- Check the condition of The vacuum - No power supply the plug and the power cleaner will not cable start - Contact DEPURECO technical assistance - Shake the filter - If this solution is not - Clogged filter effective, replace it. Irregular values... - Page 34 electronic equipment waste) The electrical and electronic parts of this product must disposed compliance with Italian Legislative Decree 151/2005 subsequent amendments. (Directive 2002/96/EC on WEEE - Waste Electrical and Electronic Equipment) In the event of doubts, avoid interpreting the information! Call immediately your reseller! Page 34 of 38...
- Page 35 MAINTENANCE LOG: INTERVENTION 1: DATE: TECHNICAL ASSISTANCE: TYPE OF INTERVENTION: INTERVENTION 2: DATE: TECHNICAL ASSISTANCE: TYPE OF INTERVENTION:...
- Page 36 INTERVENTION 3: DATE: TECHNICAL ASSISTANCE: TYPE OF INTERVENTION: INTERVENTION 4: DATE: TECHNICAL ASSISTANCE: TYPE OF INTERVENTION:...