Table of Contents
Advertisement
Warning!
Before inserting the plug, ensure that the voltage of the power
supply line
corresponds to the one indicated on the vacuum's identification
plate.
-
Ensure that the power plug is inserted into the socket correctly.
-
Make sure the hose is properly inserted and locked in the suction inlet.
-
Make sure the bin. is located and blocked under the chamber of the
vacuum cleaner
-
Secure the vacuum cleaner using the lever on the swivel caster, as shown
in the figure.
Hold the end of the hose with the chosen vacuum accessory.
To start using the vacuum cleaner, rotate the VACUUM CLEANER START/STOP switch
(2) to "I"; to switch it off, rotate it "O".
Ensure that the direction of rotation of the blower matches the figure below
Warning!
Before switching the vacuum cleaner on again, ensure the blower
has come to a complete stop.
Caution!
Page 21 of 38
Advertisement
Table of Contents
