Maintenance Section; Informative Notes; General Safety Regulations - DEPURECO TB Series Instruction And Maintenance Manual

Hide thumbs Also See for TB Series:
Table of Contents

Advertisement

5. MAINTENANCE SECTION

Warning!
Special
specialised technicians authorised by the DEPURECO dealer.
5.1

Informative notes

This
section
describes
required to ensure proper vacuum operation.
Maximum
reliability
planned maintenance and inspection schedule carefully followed throughout
the entire lifespan of the vacuum.
Observe
the
set
according to specific requirements in relation with the vacuum production
cycle.
Always use perfectly working tools specifically intended for the operation
to be carried out; the use of inadequate or inefficient tools can cause
severe damages.
Any other intervention required to remove faults or malfunctions must be
expressly authorised by the manufacturer.
In these cases, always communicate the vacuum identification data - see
para. 1.4 of this manual.
For significant repairs, refer to the authorised dealer, whose specialised
personnel has the technological expertise and is always available for prompt
interventions.
For user maintenance operations, the vacuum must be disassembled, cleaned
and maintained, where possible, in such a way as to prevent hazards to the
maintenance personnel and to third parties. Suitable precautionary measures
include decontamination before dismantling, measures for filtered forced
ventilation of the room where the appliance is disassembled, cleaning of the
maintenance area and suitable personal protection equipment.
Once every three months (or more frequently, according to the operating
cycle and the conditions of use), the manufacturer or a qualified technician
must check the filters, ensuring that they are not damaged; the tightness of
the air system and proper operation of the control devices.
Should maintenance operations or repairs be carried out, all contaminated
objects must be adequately cleaned, placed in waterproof bags and disposed
of in compliance with the regulations in force.
5.2

General safety regulations

vacuum
maintenance
the
checks
and
minimum
maintenance
maintenance
intervals
Page 27 of 38
must
be
carried
and
routine
maintenance
costs
are
and
schedule
out
solely
by
operations
the
result
of
a
the
interventions

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tb m z22Tb t z22Tb plus z22Atex z22 ii3d

Table of Contents