Table of Contents
Advertisement
DEPURECO INDUSTRIAL VACUUMS S.r.l. - Via Perosi, 3 - 10040 Volvera (TO) - ITALY
tel. +39 011 98 59 117 - fax +39 011 98 59 326 - e-mail
depureco@depureco.com
www.depureco.com
- Tax Id and VAT No. 02258610357
INSTRUCTION
AND MAINTENANCE
MANUAL
INDUSTRIAL
VACUUM
SERIES
MINI BULL -
TB
This manual is an integral part of the vacuum.
Carefully read this manual and its attachments. Knowing the instructions contained in it is
crucial for using the vacuum and carrying out maintenance operations under full safety
conditions.
rev. 0 dated 21-10-2013
Single document page 1 of 41 pages.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for DEPURECO MINI BULL Series
Summary of Contents for DEPURECO MINI BULL Series
- Page 1 DEPURECO INDUSTRIAL VACUUMS S.r.l. - Via Perosi, 3 - 10040 Volvera (TO) - ITALY tel. +39 011 98 59 117 - fax +39 011 98 59 326 - e-mail depureco@depureco.com www.depureco.com - Tax Id and VAT No. 02258610357 INSTRUCTION AND MAINTENANCE...
- Page 2 CE DECLARATION OF CONFORMITY (for machines not included in Annex IV) The Manufacturer DEPURECO INDUSTRIAL VACUUMS S.r.l. - Via Perosi, 3 - 10040 Volvera (TO) - ITALY tel. +39 011 98 59 117 - fax +39 011 98 59 326 - e-mail depureco@depureco.com www.depureco.com...
-
Page 3: Table Of Contents
INDUSTRIAL VACUUMS Mini BULL - TB USE AND MAINTENANCE MANUAL Summary INFORMATIVE SECTION ..................... 4 Preface ..........................4 Identification of the main parts ..................6 Optional parts ........................7 Manufacturer's identification data ..................7 Identification plate ......................7 Intended use ........................7 Allowed environmental conditions .................. -
Page 4: Informative Section
Mini BULL - TB USE AND MAINTENANCE MANUAL IMPORTANT - The DEPURECO name and logo used in this document refer to and are property of DEPURECO INDUSTRIAL VACUUMS S.r.l. This document is the exclusive property of DEPURECO S.r.l. Therefore it may not be reproduced either partially or totally by any means (graphic, computer, etc.), without the Company's authorisation. - Page 5 This manual is integral part of the vacuum and must accompany it at all times, until its demolition. In the event it is lost or damaged, you can request another copy from DEPURECO INDUSTRIAL VACUUMS S.r.l. (hereafter simply called DEPURECO).
-
Page 6: Identification Of The Main Parts
INDUSTRIAL VACUUMS Mini BULL - TB USE AND MAINTENANCE MANUAL Identification of the main parts on/off commands voltage and blocked filter warning lights (only on Mini Bull) grip for handling filter chamber filter shaking lever suction nozzle collection container for vacuumed material container release lever accessory holder blower (TB only) -
Page 7: Optional Parts
Mini BULL - TB USE AND MAINTENANCE MANUAL Optional parts DEPURECO provides a wide range of optional accessories, according to the application of the vacuum. Manufacturer's identification data DEPURECO INDUSTRIAL VACUUMS S.r.l. Via Perosi, 3 - 10040 Volvera (TO) - ITALY tel. -
Page 8: Noise Level
INDUSTRIAL VACUUMS Mini BULL - TB USE AND MAINTENANCE MANUAL Noise level Photometric tests carried out on these specific models have shown a sound pressure level of Mini BULL TB 15 TB 22 TB 22/22 Attention! For sound pressure levels above 85 dB(A), exposed workers must wear suitable personal protective equipment (PPE), such as type-approved individual hearing protection. -
Page 9: Technical Data
INDUSTRIAL VACUUMS Mini BULL - TB USE AND MAINTENANCE MANUAL Technical data U.M. Mini BULL TB 15 TB 22 TB 22/22 Weight (*) Kg/Lb 45/99 50/110 52/114 52/114 55x62x125 55x62x134 55x62x140 55x62x140 Overall dimensions (*) 1,8x2x4,10 1,8x2x4,39 1,8x2x4,6 1,8x2x4,6 Supply voltage 230/115 Power kW / HP... -
Page 10: 1.10 Warranty
DEPURECO shall not be held liable for any injuries to persons or damage to objects caused by misuse or improper use of the vacuum. -
Page 11: Safety Section
Adequate training is crucial to this end. DEPURECO shall not be held liable for accidents or damage due to the improper use of the vacuum by untrained personnel or to failure to comply, even partially, with the occupational safety standards and intervention procedures contained in this manual. -
Page 12: Safety Requirements
INDUSTRIAL VACUUMS Mini BULL - TB USE AND MAINTENANCE MANUAL Safety requirements Attention! The indications below are important to prevent hazards that can occur while operating the vacuum. However, they cannot replace the expertise and common sense of the operators as an overall framework for accident prevention. Every section lists further safety requirements specific for the various operations. -
Page 13: Safety Plates And Symbols
• In the event that the Customer installs a tool not supplied by DEPURECO on the vacuum, it is essential to verify that the safety requirements of Machinery Directive 2006/42/CE are met, notwithstanding that DEPURECO shall not be held liable for problems caused by the use of that part. - Page 14 INDUSTRIAL VACUUMS Mini BULL - TB USE AND MAINTENANCE MANUAL Attention! Upper limb crushing hazard while inserting and locking the refuse container in place under the vacuum. Never place your hands between the vacuum and the refuse container while inserting and locking the refuse container in place under the vacuum.
-
Page 15: Residual Risks
A safety pictogram on the vacuum warns about this hazard. Risks of misinterpretation of safety pictograms With reference to risk analysis and identification, DEPURECO has installed hazard labels on the vacuum, in compliance with the standard concerning graphic symbols. The user must immediately replace any safety plate made illegible due to wear or damage. -
Page 16: Applied Directives
INDUSTRIAL VACUUMS Mini BULL - TB USE AND MAINTENANCE MANUAL DEPURECO shall not be held liable for the vacuum's safety in the event of failure to comply with this prohibition. Applied Directives The following Directives apply to the vacuum described in this manual:... -
Page 17: Handling, Unpacking And Installation Section
INDUSTRIAL VACUUMS Mini BULL - TB USE AND MAINTENANCE MANUAL HANDLING, UNPACKING AND INSTALLATION SECTION ……..Handling Attention! The instructions for transporting and unpacking the vacuum correctly are shown also on the packaging. The instructions below also include the operations to be carried out in the event that the vacuum must be packed or unpacked again for subsequent transport. -
Page 18: Unpacking
INDUSTRIAL VACUUMS Mini BULL - TB USE AND MAINTENANCE MANUAL When using a forklift, lift the load 200 mm off the ground and swing backwards. Always keep the height of the working environment in mind when lifting loads. Before starting any movement, ensure that the area is cleared and that there are no moving objects on the packaging. - Page 19 INDUSTRIAL VACUUMS Mini BULL - TB USE AND MAINTENANCE MANUAL remove the carton loosen and remove the fastening screws and brackets from both sides Mini Bull - TB Manual page 19 of 41 pages...
-
Page 20: Installation
In the event that one or more components are damaged, do not continue with installation and inform DEPURECO about the anomaly and agree upon the actions to be taken. The vacuum is already equipped with a suction filter, which allows extracting only dry dust or debris. - Page 21 Note: the hose with its terminals and the suction accessories are not included as STANDARD. Contact your dealer (or DEPURECO) for information regarding the various types of OPTIONAL that can be used on this specific model.
-
Page 22: Operation Section
INDUSTRIAL VACUUMS Mini BULL - TB USE AND MAINTENANCE MANUAL OPERATION SECTION Description of the controls Attention! The vacuum can be used solely by authorised personnel after having read these use and maintenance instructions. The user of the equipment and the maintenance technician, who carry out interventions on the vacuum, must be adequately educated, informed and trained, in compliance with the occupational safety standards in force and, during the various operations, must wear personal protective equipment (PPE), such as safety footwear, gloves, protective... -
Page 23: Operating Cycle
INDUSTRIAL VACUUMS Mini BULL - TB USE AND MAINTENANCE MANUAL 1. Vacuum gauge: indicates suction filter clogging 2. ON-OFF master switch Operating cycle Ensure that the power cord is intact and in perfect state. Attention! Before inserting the plug, ensure that the voltage of the power supply line corresponds to that indicated on the vacuum's identification plate. - Page 24 INDUSTRIAL VACUUMS Mini BULL - TB USE AND MAINTENANCE MANUAL Attention! Do not shift the vacuum while it is operating. Hold the end of the hose with the chosen accessory. For the Mini BULL model Press one of the switches (1 or 2) and begin vacuum. For greater suction power the second motor can be turned on by pressing the other switch.
- Page 25 INDUSTRIAL VACUUMS Mini BULL - TB USE AND MAINTENANCE MANUAL Warning! Before turning the vacuum on again, ensure that the pump has fully stopped. Attention! If dust escapes from the head of the vacuum (for the Mini Bull) or from the silencer (for TB) the filter may be broken.
-
Page 26: Emptying The Refuse Container
INDUSTRIAL VACUUMS Mini BULL - TB USE AND MAINTENANCE MANUAL lift and then lower the lever energetically to shake the internal filter. Warning! Do not, under any circumstance, use the machine with a clogged filter. Attention! If the vacuum is not working properly after having cleaned the filter, it can mean that filter is clogged and needs to be replaced. - Page 27 INDUSTRIAL VACUUMS Mini BULL - TB USE AND MAINTENANCE MANUAL unlock the container by lifting the lever remove the container from the vacuum, using the handle empty the vacuum container in the dedicated container and dispose of it in compliance with the standards in force in the country of use Mini Bull - TB Manual page 27 of 41 pages...
-
Page 28: Inserting And Locking The Refuse Container
INDUSTRIAL VACUUMS Mini BULL - TB USE AND MAINTENANCE MANUAL Attention! In the event that the container weighs over 15 Kg, have somebody help you. Attention! Waste must be disposed of in compliance with the standards in force in the country of use –... -
Page 29: Storage - Decommissioning
INDUSTRIAL VACUUMS Mini BULL - TB USE AND MAINTENANCE MANUAL Attention! Upper limb crushing hazard! Do not, under any circumstance, place your hands between the container and the vacuum while locking it. Storage - decommissioning Remove the filter and clean it; empty the refuse collection container and store the vacuum in a place protected against weather agents with the temperature ranging between 0 and 40 °C and cover it with a nylon tarp to protect it against dust. -
Page 30: Maintenance Section
USE AND MAINTENANCE MANUAL MAINTENANCE SECTION Attention! Special vacuum maintenance must be carried out solely by specialised technicians authorised by the DEPURECO dealer. Information notes This section describes the verifications and routine maintenance operations required to ensure proper vacuum operation. -
Page 31: General Safety Regulations
INDUSTRIAL VACUUMS Mini BULL - TB USE AND MAINTENANCE MANUAL General safety regulations Attention! All the operations described above must be carried out with the plug disconnected from the socket (and the air disconnected from the CCA system). Before starting any maintenance or cleaning operation, wear suitable PPE (protective clothing, goggles and/or gloves, etc.) according to the work to be done. - Page 32 (information c/o DEPURECO) - this operation requires the skills of an electrician. - Ensure the integrity of the safety symbols (pictograms) applied to the vacuum.
-
Page 33: Replacing The Filter
INDUSTRIAL VACUUMS Mini BULL - TB USE AND MAINTENANCE MANUAL Replacing the filter Attention! Wear appropriate PPE (dust mask, latex gloves, goggles, etc.). To replace the filter, proceed as follows: turn off the machine disconnect the vacuum from electric power supply remove the container as described at point 4.3 from the bottom of the filter chamber, release the clip and remove the cage filter securing pin to the filter shaker lever... - Page 34 INDUSTRIAL VACUUMS Mini BULL - TB USE AND MAINTENANCE MANUAL unlock the two locking hooks from both sides of the base of the head on the filter chamber remove the head with its base remove the HEPA filter, following the procedure mentioned above. remove the filter and place everything on a worktop Mini Bull - TB Manual page 34 of 41 pages...
- Page 35 (possibly after adding the band with the HEPA filter) lock the two fastening latches (C) connect the power supply turn the vacuum on, checking its operation. USE ONLY GENUINE DEPURECO FILTERS Mini Bull - TB Manual page 35 of 41 pages...
-
Page 36: H Filter (Or Hepa Filter)
INDUSTRIAL VACUUMS Mini BULL - TB USE AND MAINTENANCE MANUAL H filter (or HEPA filter) - The HEPA filter is capable of retaining almost 100% of vacuumed dust. The vacuum equipped with this type of filter must be periodically verified relative to the filtering ability. Attention! To replace the HEPA filter wear appropriate PPE (dust mask, protective goggles, latex gloves, etc.). -
Page 37: Troubleshooting
- No power supply Check the electric plug and power cord - Reset the circuit breaker (TB) - Circuit breaker tripped (TB) - Contact the DEPURECO technical service centre - - Shake the filter. Should this not be enough, - Clogged filter The vacuum gauge replace it. -
Page 38: Wear Materials
INDUSTRIAL VACUUMS Mini BULL - TB USE AND MAINTENANCE MANUAL Wear materials Description Art. no. filter class L cod. P11606 Filter class M P11661 Filter class H P11640 Scrapping To prevent damaging the environment in the event of scrapping, all the components of the vacuum must be disposed of responsibly in suitable landfills and in compliance with the standards in force - for Italy, Legislative Decree 152/2006 and subsequent amendments and additions. - Page 39 To benefit from the warranty, copy this form, fill it all in, possibly in block capital letters and fax it to the manufacturer at the following number 0 1 1 . 9 8 5 9 3 2 6 or DEPURECO@DEPURECO.com VACUUM / COMPONENTS Model Serial Number Delivery date: …………………………………...
- Page 40 INDUSTRIAL VACUUMS Mini BULL - TB USE AND MAINTENANCE MANUAL MAINTENANCE LOG Date INTERVENTION 1 Technical Assistance Type of intervention Signature Date INTERVENTION 2 Technical Assistance Type of intervention Signature Mini Bull - TB Manual page 40 of 41 pages...
- Page 41 INDUSTRIAL VACUUMS Mini BULL - TB USE AND MAINTENANCE MANUAL MAINTENANCE LOG Date INTERVENTION 3 Technical Assistance Type of intervention Signature Date INTERVENTION 4 Technical Assistance Type of intervention Signature Mini Bull - TB Manual page 41 of 41 pages...
Need help?
Do you have a question about the MINI BULL Series and is the answer not in the manual?
Questions and answers