Table of Contents
Advertisement
2.2
Safety recommendations
WARNING!
The following information is essential in view of preventing all
hazards
However, they cannot replace the expertise and common sense of
operators as an overall framework for the prevention of accidents.
Structural damage, alterations or improper repairs can modify the
protective
certification and releasing DEPURECO from any liability.
Each section lists further safety measures specific to the various
functions.
WARNING!
Setting to work – connection to the power supply
Make sure there is no evident sign of damage to the vacuum cleaner
before starting work.
Before plugging the vacuum cleaner into the electrical mains, make
sure the voltage rating
indicated on the data plate corresponds to that of the electrical
mains.
Plug the vacuum cleaner into a socket with a correctly installed
ground contact/connection.
Make sure that the vacuum cleaner is turned off.
The plugs and connectors of the connection cables must be protected
against splashes of
water.
Check
that
electrical mains.
Use the vacuum cleaner only when the cables that connect to the
electrical mains are in perfect condition (damaged cables could
lead to electric shocks!).
Regularly
cracks or ageing on the electric cable.
WARNING!
When the vacuum cleaner is operating, do not:
Crush, pull, damage or tread on the cable that connects to the
electrical mains.
Only disconnect the cable from the electrical mains by removing the
plug (do not pull the
cable).
Only replace the electric power cable with one of the same type as
the original: H07 RN - F. The same rule applies if an extension is
used.
The cable must be replaced by the manufacturer's Service Centre
staff or by equivalent qualified personnel.
that
may
occur
while
capacity
of
the
the
vacuum
cleaner
check
there
are
Page 11 of 38
the
vacuum
vacuum,
thereby
is
properly
no
signs of
damage,
cleaner
is
running.
nullifying
this
connected
to
the
excessive
wear,
Advertisement
Table of Contents
