Optional Parts; Manufacturer's Identification Data; Identification Plate; Permitted Uses - DEPURECO XM 20T Series Instruction And Maintenance Manual

1.3

Optional parts

A wide range of optional accessories is available from DEPURECO depending on the intended use of
the vacuum.
1.4

Manufacturer's identification data

DEPURECO INDUSTRIAL VACUUMS S.r.l.
Corso Europa 609 - 10088 Volpiano (TO) - ITALY
phone +39 011 98 59 117 - fax +39 011 98 59 326 | VAT NO. 02258610357
e-mail: depureco@depureco.com - website: www.depureco.com
1.5

Identification plate

The data on the vacuum identification plate must be referred to in any correspondence with the
manufacturer or the dealer.
1.6

Permitted Uses

These vacuum cleaners are designed and built according to the 2014/34/EU (ATEX) Directive for an
exclusive professional industrial use; either way, for any non-domestic use,
This vacuum cleaner is suitable for the cleaning and the collection of solid materials, only in covered
areas. This vacuum cleaner is designed to collect combustible dust and/or dry particles in Zone 222
classified atmospheres with the following limitations:
Minimum Ignition Energy (MIE) of the dust >3mJ
Kst-Value of the dust <300 bas m/s (St1, St2)
The vacuum cleaner was conceived to be used by only one operator.
In accordance with the Directive 1999/92/EC, whenever in the presence of combustible dust and/or
flammable gas, it's the responsibility of the employer to carry out the classification of the Zone and to
choose a device in the appropriate category (According to the definition given in the 2014/34/EU
Directive.
Any other use is considered IMPROPER.
Pag. 8 di 44