Analog Output Adjustment - Ametek Jofra DTI-1000 A Reference Manual

8.2.7

Analog output adjustment

(only DTI-1000 with firmware ver. 1.60 or earlier).
This option allows you to adjust the analog output of the DTI-1000.
For adjusting the analog output you need a voltmeter 0V to 5V range
with 0.1mV resolution and an accuracy of 0.1 mV.
After entering the DTI analog output adjustment window, press "Start"
to begin the adjustment procedure.
124745 04 2017-08-10 41