Power Connection - Atmos E 2 Operating Instructions Manual

3.0 Installation and start-up
8
3.3

Power connection

Connect the ATMOS E 2 chair to line power using the included
IEC power cord. Insert the power cord to the IEC socket at
the back side of the chair base and the wall mounted power
outlet.
Make sure, power outlet features a proper ground connection.
Find all relevant electrical data (voltage and nominal frequency)
as well as the data for fuses on the label located over the
socket.
To disconnect the device, pull the power cord out of outlet
socket.
There is no indication, that product is hooked up to

line power.
Disconnect chair, if not in use, during service and

repair work and or for cleaning.